Premium Information is available for this item - Upgrade for $1 a day
5365-01-433-1084
Plate Spacer
5365014331084 014331084 1765960-114
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. View more Plate Spacer
May 2023
3
Marketplace 5365-01-433-1084
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-433-1084 2+ Documents (More...)
Updated Every Day 5365-01-433-1084 RQST NE Updated Every Day 5365-01-433-1084 RQST Updated Every Day
5365-01-433-1084 RQST NE Related Documents 5365-01-433-1084 2+ Documents ( More... ) https//www.nsnlookup.com
Plate Spacer 5365014331084 014331084 United States (US) 4. 5365-01-433-1084 Marketplace Restrictions
Approved Sources Datasheet Management BUY NE FedMall Updated Every Day 5365-01-433-1084 RQST NE Updated
Restrictions 5365-01-433-1084
5365-01-433-1084 is a Plate Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-433-1084
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-433-1084
- US Air Force (FXGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FXCX
Approved Sources 5365-01-433-1084
- Part Number
- Manufacturer
- Status
- 1765960-114
- Manufacturer
- 55973 - Honeywell Intl Inc (Active)
- Original Design
- Original Design
- 1765960-114
- 0SML3 - Aero International, Llc (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5365-01-433-1084
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Aperture Diameter [ABVL]
- 1.035 Inches Nominal
- Bolt Circle Diameter [ABKG]
- 1.187 Inches Nominal
- Bolt Hole Quantity [AECS]
- 3
- Gasket Center To Flat Distance [ADVG]
- 0.625 Inches Nominal
- Gasket Center To Second Flat Distance [ADVH]
- 0.625 Inches Nominal
- Hole Diameter [AAUB]
- 0.095 Inches Minimum And 0.100 Inches Maximum
- Material [MATT]
- Steel Comp 301 Or Steel Comp 302
- Outside Diameter [ABKV]
- 1.322 Inches Nominal
- Overall Thickness [ADUM]
- 0.0510 Inches Nominal
- Style Designator [STYL]
- Circular W/Two Peripheral Flats
Weapon Systems (WSDC) 5365-01-433-1084
DLA Procurement Analysis 5365-01-433-1084
Management Data 5365-01-433-1084
Similar Supply Items to 5365-01-433-1084
Freight Information 5365-01-433-1084
5365-01-433-1084 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 115620. A Sub NMFC of X. It has a NMFC Description of BUSHINGS NOI I/S. 5365-01-433-1084 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 59240 which rates the freight between FCL and LCL. 5365-01-433-1084 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-433-1084 is not classified as a special type of cargo when transported by water. 5365-01-433-1084 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-433-1084
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- Special requirements
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5365-01-433-1084 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: