5365-01-422-8926

20 Aug 1996 5365-01-396-5305 Shim Set 11310RNCC: 3 | RNVC: 2 | MEDALS: Y | DAC: A 21 Sep 1994 5365-01-422-8926

6685-01-309-0118 6685013090118 013090118 is an instrument designed to measure air, gas, fluid, and vapor pressure by means of an internal pressure sensitive element (bellows, bourdon tube, transducer/transmitter and the like) which transmits energy, by direct linkage, to the indicating pointer of a scale or a digital display, calibrated in units of pressure.it may include a temperature equivalent scale.for items that do not have an internal pressure sensitive element see indicator, pressure.

3432-22-309-0118 3432223090118 223090118 is a group of end items and/or parts required to perform a pressure welding process for joining metal parts by electrical heat. it may include such parts as foot switches, transformers, mechanical and electronic heat controls, water and air cooling systems, electrode or tip holders, excluding electrodes and tips. it may have air and/or mechanically operated clamps, rocker arms or presses, and may be manually, semiautomatic or fully automatic controlled.

5340-00-309-0118 5340003090118 003090118

5365-12-309-0118 5365123090118 123090118 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.