Premium Information is available for this item - Upgrade for $1 a day
5365-01-387-2220
Plate Spacer
5365013872220 013872220 136157-5 LL-HX8-9021
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. View more Plate Spacer
November 2023
1
Marketplace 5365-01-387-2220
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-387-2220 4+ Documents (More...)
Updated Every Day 5365-01-387-2220 RQST NE Updated Every Day 5365-01-387-2220 RQST Updated Every Day
/fsg-53/fsc-5365/us 5365-01-387-2220 Plate Spacer 5365013872220 013872220,136157-5 136157-5LL-HX8-9021
Plate Spacer 5365013872220 013872220,136157-5 United States (US) 4. 5365-01-387-2220 Marketplace
Restrictions Approved Sources Datasheet Management BUY NE FedMall Updated Every Day 5365-01-387-2220
Plate Spacer 5365013872220 013872220,136157-5 Upgrade for $1 a day Upgrade your Account Upgrade
5365-01-387-2220Plate Spacer5365013872220 013872220 136157 Request a Quotation from participating marketplace
Plate Spacer 5365013872220 013872220,136157-5 /us 4730-01-478-2166 Pipe Elbow 4730014782166 014782166,136157
Restrictions 5365-01-387-2220
5365-01-387-2220 is a Plate Spacer that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-387-2220
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-387-2220
- US Navy (N9BG)
- Effective Date:
- 1 May 2006
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- HDHX
Approved Sources 5365-01-387-2220
- Part Number
- Manufacturer
- Status
- 136157-5
- Manufacturer
- 94271 - Lockheed Martin Corp (Active)
- Incomplete Reference
- Incomplete Reference
- LL-HX8-9021
- 14153 - Defense Logistics Agency (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5365-01-387-2220
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Bolt Hole Quantity [AECS]
- 5
- Bolt Hole Centerline To Nearest Edge Distance [ADVJ]
- 0.310 Inches Nominal
- Criticality Code Justification [CRTL]
- Zzzy
- Hole Diameter [AAUB]
- 0.437 Inches Nominal
- Material [MATT]
- Steel Comp 302 Or Steel Comp 304
- Material Document And Classification [MDCL]
- Astm A167 Assn Std 1St Material Response Or Astm A240 Assn Std 2Nd Material Response
- Reference Number Differentiating Characteristics [ZZZY]
- As Differentiated By Material Which Must Conform To Ships Parts Control Center Special Quality Control Provisions
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 1.580 Inches Minimum And 1.660 Inches Maximum
- Overall Length [ABHP]
- 14.210 Inches Minimum And 14.290 Inches Maximum
- Overall Thickness [ADUM]
- 0.059 Inches Nominal
- Overall Width [ABMK]
- 0.620 Inches Nominal
- Special Test Features [SPCL]
- Special Quality Control Testing
- Style Designator [STYL]
- Non-Circular W/Square Corners
- Surface Treatment [SFTT]
- Passivate
- Test Data Document [TEST]
- 81349-Mil-P-23199 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5365-01-387-2220
DLA Procurement Analysis 5365-01-387-2220
- Last Stock Position:
- 3 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-01-387-2220
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5365-01-387-2220
Freight Information 5365-01-387-2220
5365-01-387-2220 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 115620. A Sub NMFC of X. It has a NMFC Description of BUSHINGS NOI I/S. 5365-01-387-2220 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 59240 which rates the freight between FCL and LCL. 5365-01-387-2220 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-387-2220 is not classified as a special type of cargo when transported by water. 5365-01-387-2220 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-387-2220
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Non-Metallic Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Special Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Special requirements
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Special Requirement - see Specific Drawing or Instruction provided
- Special requirement – See specific instructions or drawings provided
Contracting Technical Data File (CTDF) 5365-01-387-2220 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: