Premium Information is available for this item - Upgrade for $1 a day
5365-01-387-2160
Shim
5365013872160 013872160 136157-3
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
November 2023
1
Marketplace 5365-01-387-2160
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-387-2160 3+ Documents (More...)
Updated Every Day 5365-01-387-2160 RQST NE Related Documents 5365-01-387-2160 3+ Documents ( More...
) https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-387-2160 Shim 5365013872160 013872160,136157-
Shim 5365013872160 013872160,136157-3 item - Upgrade for $1 a day Upgrade your Account Upgrade
5365-01-387-2160Shim5365013872160 013872160 136157 01-387-2160 Shim 5365013872160 013872160,136157- https
Restrictions 5365-01-387-2160
5365-01-387-2160 is a Shim that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-387-2160
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-387-2160
- US Navy (N9BG)
- Effective Date:
- 1 May 2006
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- HDHX
Approved Sources 5365-01-387-2160
- Part Number
- Manufacturer
- Status
- 136157-3
- Manufacturer
- 94271 - Lockheed Martin Corp (Active)
- Incomplete Reference
- Incomplete Reference
Datasheet 5365-01-387-2160
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Bolt Hole Quantity [AECS]
- 5
- Bolt Hole Centerline To Nearest Edge Distance [ADVJ]
- 0.310 Inches Nominal
- Construction [CQCF]
- Laminated
- Criticality Code Justification [CRTL]
- Zzzy
- Hole Diameter [AAUB]
- 0.312 Inches Nominal
- Material [MATT]
- Steel Comp 302 Or Steel Comp 304
- Lamination Quantity [BRDX]
- 16
- Reference Number Differentiating Characteristics [ZZZY]
- As Differentiated By Material Which Must Conform To Ships Parts Control Center Special Quality Control Provisions
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 1.460 Inches Minimum And 1.540 Inches Maximum
- Overall Length [ABHP]
- 13.960 Inches Minimum And 14.040 Inches Maximum
- Overall Thickness [ADUM]
- 0.032 Inches Nominal
- Overall Width [ABMK]
- 0.620 Inches Nominal
- Special Test Features [SPCL]
- Special Quality Control Testing
- Style Designator [STYL]
- Non-Circular W/Square Corners
- Test Data Document [TEST]
- 81349-Mil-P-23199 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5365-01-387-2160
DLA Procurement Analysis 5365-01-387-2160
- Last Stock Position:
- 3 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-01-387-2160
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5365-01-387-2160
Freight Information 5365-01-387-2160
5365-01-387-2160 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 115620. A Sub NMFC of X. It has a NMFC Description of BUSHINGS NOI I/S. 5365-01-387-2160 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 59240 which rates the freight between FCL and LCL. 5365-01-387-2160 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-387-2160 is not classified as a special type of cargo when transported by water. 5365-01-387-2160 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-387-2160
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Non-Metallic Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Special Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Special requirements
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Special Requirement - see Specific Drawing or Instruction provided
- Special requirement – See specific instructions or drawings provided
Contracting Technical Data File (CTDF) 5365-01-387-2160 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: