Premium Information is available for this item - Upgrade for $1 a day
5365-01-358-1862
Sleeve Spacer
5365013581862 013581862 NAS43 NAS43DD4-65N NAS43DD4-65FC
A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (When the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED; SPACER, RING; WASHER, FLAT; and WASHER, (as modified). View more Sleeve Spacer
November 2023
9
Marketplace 5365-01-358-1862
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-358-1862 5+ Documents (More...)
Sleeve Spacer 5365013581862 013581862,NAS43 5365-01-358-1862 5365013581862 013581862 is a tubular
Sleeve Spacer 5365013581862 013581862,NAS43 Upgrade for $1 a day Upgrade your Account Upgrade 5365
-01-358-1862Sleeve Spacer5365013581862 013581862 NAS43 Spacer NAS43HT5-64RNCC: 3 | RNVC: 2 | MEDALS:
Spacer NAS43HT5-64RNCC: 3 | RNVC: 2 | MEDALS: Y | DAC: X 1 Jan 1960 5365-00-880-0196 Sleeve Spacer NAS43
9 May 1992 5365-01-358-1862 Sleeve Spacer NAS43DD4-65FCRNCC: 5 | RNVC: 9 | DAC: 5 8 May 1992 5365-01
AssyUOMTechnical DocumentQuantative ExpressionDefense Logistics Agency (DS)IZDiscontinued-Use 5365-01-358-1862
8 May 1992 5365-01-358-2242 Sleeve Spacer NAS43DD6-29NRNCC: 3 | RNVC: 2 | DAC: E 9 May 1992 5365-01-358-1862
7846 Sleeve Spacer NAS43DD3-173NRNCC: 3 | RNVC: 2 | DAC: E 5 Mar 2007 5365-01-541-8364 Sleeve Spacer NAS43
Restrictions 5365-01-358-1862
5365-01-358-1862 is a Sleeve Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-358-1862
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-358-1862
- US Army (A919)
- Effective Date:
- 1 May 2006
- Former MOE Rule:
- A180
- Supplementary Receivers:
- BD
- US Air Force (FXGG)
- Effective Date:
- 1 May 2006
- Former MOE Rule:
- FXCX
- US Navy (N9BG)
- Effective Date:
- 1 May 2006
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTKEHD
- Spain (YB01)
- Effective Date:
- 1 Jun 1999
- United Kingdom (ZK01)
- Effective Date:
- 1 Feb 2001
Approved Sources 5365-01-358-1862
- Part Number
- Manufacturer
- Status
- NAS43
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- NAS43DD4-65N
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- NAS43DD4-65FC
- 80205 - National Aerospace Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5365-01-358-1862
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Body Inside Diameter [ADAS]
- 0.2560 Inches Minimum And 0.2970 Inches Maximum
- Body Outside Diameter [ADAR]
- 0.3650 Inches Minimum And 0.3850 Inches Maximum
- Corner Shape [BZLX]
- Square All Corners
- Material Document And Classification [MDCL]
- Ww-T-700/3,Ty1,T3 Fed Spec Single Material Response Overall Or Qq-A-225/6,T4 Fed Spec Single Material Response Overall
- Material [MATT]
- Aluminum Alloy 2024 Overall
- Overall Length [ABHP]
- 1.0106 Inches Minimum And 1.0206 Inches Maximum
- Special Features [FEAT]
- Gray Anodize
- Specification/Standard Data [ZZZK]
- 80205-Nas43 Professional/Industrial Association Standard
- Style Designator [STYL]
- Solid, Plain, No Outside Flanges
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625,Ty1 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Anodize Overall
Weapon Systems (WSDC) 5365-01-358-1862
DLA Procurement Analysis 5365-01-358-1862
- Last Stock Position:
- 27 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-01-358-1862
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5365-01-358-1862
Freight Information 5365-01-358-1862
5365-01-358-1862 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 115620. A Sub NMFC of X. It has a NMFC Description of BUSHINGS NOI I/S. 5365-01-358-1862 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 59240 which rates the freight between FCL and LCL. 5365-01-358-1862 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-358-1862 is not classified as a special type of cargo when transported by water. 5365-01-358-1862 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-358-1862
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5365-01-358-1862 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: