Premium Information is available for this item - Upgrade for $1 a day
5365-01-356-6655
Shim
5365013566655 013566655 S9011F252-010
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
January 2023
2
Marketplace 5365-01-356-6655
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-356-6655 1+ Documents (More...)
Shim 5365013566655 013566655,S9011F252-010 5365-01-356-6655 5365013566655 013566655 is a thin flat
Restrictions 5365-01-356-6655
5365-01-356-6655 is a Shim Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5365-01-356-6655
- US Air Force (FBB5)
- Effective Date:
- 1 May 2000
- Former MOE Rule:
- FECX
Approved Sources 5365-01-356-6655
- Part Number
- Manufacturer
- Status
- S9011F252-010
- Manufacturer
- 99193 - Honeywell International Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 5365-01-356-6655
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Aperture Diameter [ABVL]
- 0.285 Inches Minimum And 0.290 Inches Maximum
- Construction [CQCF]
- One-Piece
- Outside Diameter [ABKV]
- 0.480 Inches Minimum And 0.485 Inches Maximum
Management Data 5365-01-356-6655
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- May 2010
- Department of the Air Force (DF)
- EA
- Subscribe
- EA
Air Force
- Budget:
- S
- 57X3010 - Aircraft Replenishment Spares
- Aggregation Code:
- BA
- C-17 PROGRAM
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5365-01-356-6655
Freight Information 5365-01-356-6655
5365-01-356-6655 has freight characteristics.. 5365-01-356-6655 has a variance between NMFC and UFC when transported by rail and the description should be consulted.