Premium Information is available for this item - Upgrade for $1 a day
5365-01-341-8564
Shim
5365013418564 013418564 12592775
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
May 2023
2
Marketplace 5365-01-341-8564
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-341-8564 1+ Documents (More...)
Every Day 5365-01-341-8564 RQST NE Updated Every Day 5365-01-341-8564 RQST Updated Every Day 5365-01
/fsg-53/fsc-5365/us 5365-01-341-8564 Shim 5365013418564 013418564,12592775 12592775 A thin flat metal
Restrictions 5365-01-341-8564
5365-01-341-8564 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-341-8564
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-341-8564
- US Army (A919)
- Effective Date:
- 1 Aug 2010
- Former MOE Rule:
- A403
- Supplementary Receivers:
- BFCN
Approved Sources 5365-01-341-8564
- Part Number
- Manufacturer
- Status
- 12592775
- Manufacturer
- 19200 - Combat Capabilities Development (Active)
- Primary Buy
- Primary Buy
Datasheet 5365-01-341-8564
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Bolt Hole Quantity [AECS]
- 4
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 5.620 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Width [ADUY]
- 1.370 Inches Nominal
- End Item Identification [AGAV]
- Used On Abf334 Ar5
- Hole Diameter [AAUB]
- 0.625 Inches Minimum And 0.645 Inches Maximum
- Material [MATT]
- Steel
- Material Document And Classification [MDCL]
- Astm A619/A619m Assn Std Single Material Response Or Astm A621/A621m Assn Std Single Material Response
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.580 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Width [ADVD]
- 0.765 Inches Nominal
- Overall Length [ABHP]
- 6.720 Inches Minimum And 6.780 Inches Maximum
- Overall Width [ABMK]
- 2.840 Inches Minimum And 2.900 Inches Maximum
- Special Features [FEAT]
- Shim Has 2 Rectangular Cutouts 2.57 In By 0.68 In
- Style Designator [STYL]
- Non-Circular W/Bolt Holes
Weapon Systems (WSDC) 5365-01-341-8564
DLA Procurement Analysis 5365-01-341-8564
- Last Stock Position:
- 1414 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-01-341-8564
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- GJ
- Artillery
Howitzer, Light Towed, 105mm, M119A1
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 5365-01-341-8564
Freight Information 5365-01-341-8564
5365-01-341-8564 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5365-01-341-8564 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-341-8564 is not classified as a special type of cargo when transported by water. 5365-01-341-8564 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-341-8564
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Non-Metallic Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Special Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Special requirements
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Special Requirement - see Specific Drawing or Instruction provided
- Special requirement – See specific instructions or drawings provided
Contracting Technical Data File (CTDF) 5365-01-341-8564 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- S
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: