Premium Information is available for this item - Upgrade for $1 a day
5365-01-338-7357
Shim
5365013387357 013387357 BACS40R012E026F
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
May 2023
3
Marketplace 5365-01-338-7357
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-338-7357 1+ Documents (More...)
Updated Every Day 5365-01-338-7357 RQST NE Related Documents 5365-01-338-7357 1+ Documents ( More...
Updated Every Day 5365-01-338-7357 RQST NE Updated Every Day 5365-01-338-7357 RQST Updated Every Day
Restrictions 5365-01-338-7357
5365-01-338-7357 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5365-01-338-7357
- National Security Agency (DGX1)
- Effective Date:
- 1 Apr 2007
Approved Sources 5365-01-338-7357
- Part Number
- Manufacturer
- Status
- BACS40R012E026F
- Manufacturer
- 81205 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
Datasheet 5365-01-338-7357
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Construction [CQCF]
- Laminated
- Features Provided [CBBL]
- Separable
- Lamination Quantity [BRDX]
- 21 And 1
- Lamination Thickness [BRDY]
- 0.003 Inches Nominal And 0.062 Inches Nominal
- Overall Length [ABHP]
- 2.580 Inches Minimum And 2.620 Inches Maximum
- Overall Width [ABMK]
- 1.180 Inches Minimum And 1.220 Inches Maximum
- Specification/Standard Data [ZZZK]
- 81205-Bacs40r Rev T,F And B Manufacturers Standard
- Style Designator [STYL]
- Rectangular
- Surface Treatment Document And Classification [STDC]
- Mil-C-5541,Class 1A Mil Spec Single Treatment Response
- Surface Treatment [SFTT]
- Chromate
DLA Procurement Analysis 5365-01-338-7357
Management Data 5365-01-338-7357
Similar Supply Items to 5365-01-338-7357
Freight Information 5365-01-338-7357
5365-01-338-7357 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 133300. A Sub NMFC of Z. It has a NMFC Description of MACHINERY/MACHINES NOI. 5365-01-338-7357 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 63220 which rates the freight between FCL and LCL. 5365-01-338-7357 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-338-7357 is not classified as a special type of cargo when transported by water. 5365-01-338-7357 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5365-01-338-7357 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: