Premium Information is available for this item - Upgrade for $1 a day
5365-01-307-5313
Shim
5365013075313 013075313 0398238-1
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
May 2023
3
Marketplace 5365-01-307-5313
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-307-5313 1+ Documents (More...)
/fsg-53/fsc-5365/us
Updated Every Day 5365-01-307-5313 RQST NE Related Documents 5365-01-307-5313 1+ Documents ( More...
) https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-307-5313 Shim 5365013075313 013075313,0398238
Restrictions 5365-01-307-5313
5365-01-307-5313 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-307-5313
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-307-5313
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FGCX
Approved Sources 5365-01-307-5313
- Part Number
- Manufacturer
- Status
- 0398238-1
- Manufacturer
- 24587 - Raytheon Co (Active)
- Primary Buy
- Primary Buy
- 0398238-1
- 1CZ63 - Banner Metalcraft Inc (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5365-01-307-5313
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Aperture Width [ADUE]
- 0.318 Inches Minimum And 0.324 Inches Maximum
- Aperture Length [ADUF]
- 0.717 Inches Minimum And 0.723 Inches Maximum
- Bolt Hole Quantity [AECS]
- 4
- Construction [CQCF]
- Laminated
- Hole Diameter [AAUB]
- 0.153 Inches Minimum And 0.159 Inches Maximum
- Material [MATT]
- Aluminum Alloy
- Lamination Quantity [BRDX]
- 31
- Lamination Thickness [BRDY]
- 0.002 Inches Nominal
- Overall Length [ABHP]
- 1.330 Inches Minimum And 1.350 Inches Maximum
- Overall Width [ABMK]
- 1.120 Inches Minimum And 1.140 Inches Maximum
- Special Features [FEAT]
- Has 6 Additional Bolt Holes W/0.0960-0.0965 In. Dia; Aperture Has 2 Slots Opposite Each Other Along Length 0.172-0.174 In. Long And 0.110 In. Deep
- Style Designator [STYL]
- Non-Circular W/Bolt Holes
Weapon Systems (WSDC) 5365-01-307-5313
DLA Procurement Analysis 5365-01-307-5313
Management Data 5365-01-307-5313
Similar Supply Items to 5365-01-307-5313
Freight Information 5365-01-307-5313
5365-01-307-5313 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5365-01-307-5313 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. 5365-01-307-5313 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5365-01-307-5313 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-307-5313 is not classified as a special type of cargo when transported by water. 5365-01-307-5313 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-307-5313
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5365-01-307-5313 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: