Premium Information is available for this item - Upgrade for $1 a day
5365-01-229-2048
Plate Spacer
5365012292048 012292048 100836
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. View more Plate Spacer
May 2023
9
Marketplace 5365-01-229-2048
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-229-2048 5+ Documents (More...)
Restrictions 5365-01-229-2048
5365-01-229-2048 is a Plate Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-229-2048
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-229-2048
- US Navy (N9BG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTKE
- Brazil (YA01)
- Effective Date:
- 1 Oct 2001
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Jul 2005
- Turkey (ZW01)
- Effective Date:
- 1 Dec 2005
Approved Sources 5365-01-229-2048
- Part Number
- Manufacturer
- Status
- 100836
- Manufacturer
- 54786 - Bae Systems Land & Armaments L.P. (Active)
- Primary Buy
- Primary Buy
Datasheet 5365-01-229-2048
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 1.580 Inches Nominal
- End Radius [ABPZ]
- 0.350 Inches Nominal
- Material Document And Classification [MDCL]
- Mil-S-5059 Mil Spec Single Material Response
- Material [MATT]
- Steel Comp 301
- Largest Bolt Hole Diameter [BYWX]
- 0.250 Inches Minimum And 0.255 Inches Maximum
- Smallest Bolt Hole Diameter [BYWW]
- 0.195 Inches Minimum And 0.200 Inches Maximum
- Overall Width [ABMK]
- 1.000 Inches Nominal
- Surface Treatment Document And Classification [STDC]
- Mil-C-13924 Cl4 Mil Spec Single Treatment Response
- Surface Treatment [SFTT]
- Oxide Film
Weapon Systems (WSDC) 5365-01-229-2048
DLA Procurement Analysis 5365-01-229-2048
Management Data 5365-01-229-2048
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5365-01-229-2048
Freight Information 5365-01-229-2048
5365-01-229-2048 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5365-01-229-2048 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5365-01-229-2048 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-229-2048 is not classified as a special type of cargo when transported by water. 5365-01-229-2048 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5365-01-229-2048 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: