Premium Information is available for this item - Upgrade for $1 a day
5365-01-227-1477
Shim
5365012271477 012271477 10945-1
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
November 2023
4
Marketplace 5365-01-227-1477
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-227-1477 5+ Documents (More...)
Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 015-10945-1
ADAPTER ASSEMBLY,CANOPY 1 EA NS Request Quotation Subscribe to View Vendor Details... 015-10945-1
Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 015-10945-1
Subscribe to View Vendor Details... 015-10945-7 ADAPTER ASSEMBLY 1670 EA NS Request Quotation 015-10945-1
031097-01 26916 - Northrop Grumman Systems Corporation (Active) Source Control RNCC 1 RNVC 2 DAC 5 10945-1
Restrictions 5365-01-227-1477
5365-01-227-1477 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-227-1477
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-227-1477
- US Air Force (FUGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FUCX
Approved Sources 5365-01-227-1477
- Part Number
- Manufacturer
- Status
- 10945-1
- Manufacturer
- 10396 - Hercules Inc (Obsolete)
- Original Design
- Original Design
Datasheet 5365-01-227-1477
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Bolt Hole Quantity [AECS]
- 4
- Center To Center Distance Between Bolt Holes Along Width [ADUY]
- 2.000 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 4.500 Inches Nominal
- Construction [CQCF]
- Laminated
- End Item Identification [AGAV]
- Vertical Support Stand,Maint,4935-01-216-8447
- Hole Diameter [AAUB]
- 0.562 Inches Nominal
- Material Document And Classification [MDCL]
- Qq-S-698 Fed Spec Single Material Response
- Material [MATT]
- Steel
- Lamination Quantity [BRDX]
- 41
- Lamination Thickness [BRDY]
- 0.003 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.750 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Width [ADVD]
- 0.750 Inches Nominal
- Overall Length [ABHP]
- 6.000 Inches Nominal
- Overall Width [ABMK]
- 3.500 Inches Nominal
- Style Designator [STYL]
- Non-Circular W/Bolt Holes
Weapon Systems (WSDC) 5365-01-227-1477
DLA Procurement Analysis 5365-01-227-1477
- Last Stock Position:
- 8 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-01-227-1477
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- AI
- ADVANCED INTERCONTINENTAL BALLISTIC (MX)
- Price Validation Code:
- P
- The current standard price is the initial negotiated provisioned price.
This is the price paid by DoD for the item as the result of price negotiation of the Provisioned Item Order (PIO) or other initial negotiated price.
ZOP or Standard Price challenges are permissible but should be supported with adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5365-01-227-1477
Freight Information 5365-01-227-1477
5365-01-227-1477 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 106940. A Sub NMFC of X. It has a NMFC Description of SPACERS/SEPARATORS I/S NOI TUBULAR. 5365-01-227-1477 is rated as class 55 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50675 which rates the freight between FCL and LCL. 5365-01-227-1477 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 5365-01-227-1477 is not classified as a special type of cargo when transported by water. 5365-01-227-1477 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5365-01-227-1477 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: