Premium Information is available for this item - Upgrade for $1 a day
5365-01-213-8357
Shim
5365012138357 012138357 1276M69P01
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
November 2023
5
Marketplace 5365-01-213-8357
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-213-8357 1+ Documents (More...)
United States (US) 4. 5365-01-213-8357 Marketplace Restrictions Approved Sources Datasheet Management
SHIM 71 EA NS Request Quotation Updated Every Day 5365-01-213-8357 RQST NE Updated Every Day 5365-01
Restrictions 5365-01-213-8357
5365-01-213-8357 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-213-8357
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-213-8357
- US Air Force (FXGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FXCX
- Poland (WP01)
- Effective Date:
- 1 May 2007
- Greece (ZU01)
- Effective Date:
- 1 May 2008
Approved Sources 5365-01-213-8357
- Part Number
- Manufacturer
- Status
- 1276M69P01
- Manufacturer
- 07482 - General Electric Company (Active)
- Primary Buy
- Primary Buy
Datasheet 5365-01-213-8357
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Bolt Hole Quantity [AECS]
- 2
- Bolt Hole Centerline To Nearest Edge Distance [ADVJ]
- 0.350 Inches Minimum And 0.410 Inches Maximum
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 0.550 Inches Minimum And 0.570 Inches Maximum
- Construction [CQCF]
- Laminated
- Hole Diameter [AAUB]
- 0.294 Inches Minimum And 0.303 Inches Maximum
- Material [MATT]
- Steel Comp 301 Or Steel Comp 302
- Outside Corner Bevel Length Along Length [ADUQ]
- 0.200 Inches Minimum And 0.240 Inches Maximum
- Outside Corner Bevel Length Along Width [ADUP]
- 0.200 Inches Minimum And 0.240 Inches Maximum
- Lamination Quantity [BRDX]
- 10
- Lamination Thickness [BRDY]
- 0.006 Inches Nominal
- Material Document And Classification [MDCL]
- Ams 5519 Assn Std 1St Material Response Or Ams 5600 Assn Std 2Nd Material Response
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.400 Inches Minimum And 0.420 Inches Maximum
- Overall Length [ABHP]
- 1.360 Inches Minimum And 1.400 Inches Maximum
- Overall Width [ABMK]
- 0.620 Inches Minimum And 0.660 Inches Maximum
Weapon Systems (WSDC) 5365-01-213-8357
DLA Procurement Analysis 5365-01-213-8357
- Last Stock Position:
- 170 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-01-213-8357
Similar Supply Items to 5365-01-213-8357
Freight Information 5365-01-213-8357
5365-01-213-8357 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5365-01-213-8357 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5365-01-213-8357 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-213-8357 is not classified as a special type of cargo when transported by water. 5365-01-213-8357 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-213-8357
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Any Suitable Container
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5365-01-213-8357 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: