Premium Information is available for this item - Upgrade for $1 a day
5365-01-213-0580
Shim
5365012130580 012130580 13219801
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
May 2023
23
Marketplace 5365-01-213-0580
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-213-0580 1+ Documents (More...)
Restrictions 5365-01-213-0580
5365-01-213-0580 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-213-0580
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-213-0580
- US Army (A919)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- A180
- Supplementary Receivers:
- BD
- France (ZF01)
- Effective Date:
- 1 May 2015
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Aug 1995
Approved Sources 5365-01-213-0580
- Part Number
- Manufacturer
- Status
- 13219801
- Manufacturer
- 18876 - Us Army Aviation And Missile Command (Active)
- Primary Buy
- Primary Buy
- 13219801
- 53849 - De-Cha Inc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
Datasheet 5365-01-213-0580
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Bolt Hole Quantity [AECS]
- 2
- Bolt Hole Centerline To Nearest Edge Distance [ADVJ]
- 0.125 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 0.312 Inches Nominal
- Construction [CQCF]
- Laminated
- Hole Diameter [AAUB]
- 0.108 Inches Minimum And 0.113 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-A-250/1 Fed Spec 1St Material Response Or Qq-A-250/8 Fed Spec 2Nd Material Response
- Material [MATT]
- Aluminum Alloy 1100 Or Aluminum Alloy 5052
- Lamination Quantity [BRDX]
- 3
- Lamination Thickness [BRDY]
- 0.003 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.550 Inches Nominal
- Overall Length [ABHP]
- 1.100 Inches Nominal
- Overall Width [ABMK]
- 0.570 Inches Nominal
- Style Designator [STYL]
- Non-Circular W/Square Corners
DLA Procurement Analysis 5365-01-213-0580
Management Data 5365-01-213-0580
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 5365-01-213-0580
Freight Information 5365-01-213-0580
5365-01-213-0580 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5365-01-213-0580 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. 5365-01-213-0580 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5365-01-213-0580 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-213-0580 is not classified as a special type of cargo when transported by water. 5365-01-213-0580 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5365-01-213-0580 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: