Premium Information is available for this item - Upgrade for $1 a day
5365-01-210-4903
Plate Spacer
5365012104903 012104903 5593694 12338789-2 5584003 5365PL0715241
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. View more Plate Spacer
November 2023
21
Marketplace 5365-01-210-4903
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-210-4903 1+ Documents (More...)
EA NS Request Quotation 12338789-2 SPACER 32 EA NS Request Quotation 5593694 SPACER PLATE 1 EA NS Request
5365-01-210-4903 RQST Updated Every Day 5365-01-210-4903 RQST NE Related Documents 5365-01-210-4903
Restrictions 5365-01-210-4903
5365-01-210-4903 is a Plate Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-210-4903
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-210-4903
- US Army (A919)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- A180
- Supplementary Receivers:
- AZBS
- US Air Force (FXGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FXCX
- US Marine Corps (MC41)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- MC04
- US Navy (N9BG)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Lithuania (WI01)
- Effective Date:
- 1 Jun 2004
- Slovenia (WL01)
- Effective Date:
- 1 Feb 2005
- Poland (WP01)
- Effective Date:
- 1 Jun 2011
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Jul 2011
- Portugal (ZP01)
- Effective Date:
- 1 Feb 2013
- Denmark (ZS01)
- Effective Date:
- 1 Mar 1996
- Greece (ZU01)
- Effective Date:
- 1 Apr 2006
- Turkey (ZW01)
- Effective Date:
- 1 Jun 2006
Approved Sources 5365-01-210-4903
- Part Number
- Manufacturer
- Status
- 5593694
- Manufacturer
- 34623 - Am General Llc (Active)
- Primary Buy
- Primary Buy
- 12338789-2
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
- 5584003
- 34623 - Am General Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 5365012104903
- A00AM - E.C.A Etablissement Central Des (Active)
- NATO Reference
- NATO Reference
- 5365PL0715241
- 9009H - Jednolity Indeks Materialowy - (Active)
- NATO Reference
- NATO Reference
Datasheet 5365-01-210-4903
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Bolt Hole Quantity [AECS]
- 2
- Bolt Hole Centerline To Nearest Edge Distance [ADVJ]
- 0.390 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 3.333 Inches Nominal
- Hole Diameter [AAUB]
- 0.453 Inches Nominal
- Material [MATT]
- Steel Comp 1009 Or Steel Comp 1137
- Outside Corner Bevel Length Along Length [ADUQ]
- 1.020 Inches Nominal
- Material Document And Classification [MDCL]
- Astm A366 Assn Std 1St Material Response Or Astm A569 Assn Std 1St Material Response
- Special Features [FEAT]
- 30 Degrees-One End-Outside Corner Bevel Length Along Width; Other End Is .06X45degrees Chamfer-2 Pls
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.590 Inches Nominal
- Overall Length [ABHP]
- 5.200 Inches Nominal
- Overall Width [ABMK]
- 0.790 Inches Nominal
- Style Designator [STYL]
- Non-Circular W/Beveled Corners
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty 1,Cl 1 Fed Spec 1St Treatment Response Or Astm B633,Ty 2,Cl Fe/Zn25 Assn Std 2Nd Treatment Response
- Surface Treatment [SFTT]
- Cadmium Or Zinc And Chromate
Weapon Systems (WSDC) 5365-01-210-4903
DLA Procurement Analysis 5365-01-210-4903
- Last Stock Position:
- 5827 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-01-210-4903
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5365-01-210-4903
Freight Information 5365-01-210-4903
5365-01-210-4903 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 133300. A Sub NMFC of Z. It has a NMFC Description of MACHINERY/MACHINES NOI. 5365-01-210-4903 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 63220 which rates the freight between FCL and LCL. 5365-01-210-4903 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-210-4903 is not classified as a special type of cargo when transported by water. 5365-01-210-4903 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-210-4903
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5365-01-210-4903 6 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A619F6911
- 21 Dec 2018
- Subscribe
- 324
- Subscribe
- Subscribe
- Subscribe
- SPE4A617PJ559
- 02 Aug 2017
- Subscribe
- 2762
- Subscribe
- Subscribe
- Subscribe
- SPE4A617D67950001
- 13 Jul 2017
- Subscribe
- 1296
- Subscribe
- Subscribe
- Subscribe
- SPE4A617VD031
- 17 May 2017
- Subscribe
- 6440
- Subscribe
- Subscribe
- Subscribe
- SPE4A617PB252
- 12 Apr 2017
- Subscribe
- 2370
- Subscribe
- Subscribe
- Subscribe
- SPE4A417V4728
- 27 Mar 2017
- Subscribe
- 1444
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5365-01-210-4903 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: