Premium Information is available for this item - Upgrade for $1 a day
5365-01-205-1030
Shim
5365012051030 012051030 526524-3
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
May 2023
4
Marketplace 5365-01-205-1030
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-205-1030 3+ Documents (More...)
Updated Every Day 5365-01-205-1030 RQST NE Related Documents 5365-01-205-1030 3+ Documents ( More...
) https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-205-1030 Shim 5365012051030 012051030,526524-
Shim 5365012051030 012051030,526524-3 item - Upgrade for $1 a day Upgrade your Account Upgrade
5365-01-205-1030Shim5365012051030 012051030 526524 01-205-1030 Shim 5365012051030 012051030,526524- https
Shim 5365012051030 012051030,526524-3 item - Upgrade for $1 a day Upgrade your Account Upgrade
5365-01-205-1030Shim5365012051030 012051030 526524 item - Upgrade for $1 a day Upgrade your Account Upgrade
Restrictions 5365-01-205-1030
5365-01-205-1030 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-205-1030
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-205-1030
- US Air Force (FGGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FGCX
Approved Sources 5365-01-205-1030
- Part Number
- Manufacturer
- Status
- 526524-3
- Manufacturer
- 20418 - Drs Sustainment Systems, Inc. (Replaced)
- Original Design
- Original Design
Datasheet 5365-01-205-1030
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Bolt Hole Quantity [AECS]
- 2
- Bolt Hole Centerline To Nearest Edge Distance [ADVJ]
- 0.312 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 2.000 Inches Nominal
- Construction [CQCF]
- One-Piece
- Hole Diameter [AAUB]
- 0.140 Inches Minimum And 0.172 Inches Maximum
- Material Document And Classification [MDCL]
- Mil-S-5002 Mil Spec Single Material Response
- Material [MATT]
- Steel Comp 301
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.250 Inches Nominal
- Overall Length [ABHP]
- 2.500 Inches Nominal
- Overall Width [ABMK]
- 0.625 Inches Nominal
- Style Designator [STYL]
- Non-Circular W/Square Corners
- Surface Treatment [SFTT]
- Passivate
DLA Procurement Analysis 5365-01-205-1030
Management Data 5365-01-205-1030
Similar Supply Items to 5365-01-205-1030
Freight Information 5365-01-205-1030
5365-01-205-1030 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 106940. A Sub NMFC of X. It has a NMFC Description of SPACERS/SEPARATORS I/S NOI TUBULAR. 5365-01-205-1030 is rated as class 55 when transported by Less-Than Truckload (LTL) freight. 5365-01-205-1030 is rated as class 55 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 50675 which rates the freight between FCL and LCL. 5365-01-205-1030 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-205-1030 is not classified as a special type of cargo when transported by water. 5365-01-205-1030 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5365-01-205-1030 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: