Premium Information is available for this item - Upgrade for $1 a day
5365-01-200-6047
Nonmetallic Bushing
5365012006047 012006047 12322467
An item, made of rubber or plastic, usually cylindrical, with or without a flange, having one or more holes extending through its entire length, usually parallel to its axis. The overall length must exceed 25 percent of its diameter or a distance across the peripheral flats for items without a flange. For items formed of other material see BUSHING, SLEEVE. Excludes BUMPER, NONMETALLIC and GROMMET NONMETALLIC. View more Nonmetallic Bushing
November 2023
3
Marketplace 5365-01-200-6047
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-200-6047 1+ Documents (More...)
5365-01-200-6047 RQST NE Related Documents 5365-01-200-6047 1+ Documents ( More... ) https//www.nsnlookup.com
/fsg-53/fsc-5365/us 5365-01-200-6047 Nonmetallic Bushing 5365012006047012006047 12322467 An item, made
Restrictions 5365-01-200-6047
5365-01-200-6047 is a Nonmetallic Bushing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5365-01-200-6047
- US Army (A919)
- Effective Date:
- 1 May 2011
- Supplementary Receivers:
- AZ
- US Marine Corps (MC41)
- Effective Date:
- 1 May 2005
Approved Sources 5365-01-200-6047
- Part Number
- Manufacturer
- Status
- 12322467
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
Datasheet 5365-01-200-6047
- Characteristic
- Specifications
- FIIG
- Specifications
- A535J0
- Body Diameter [ABPM]
- 1.750 Inches Nominal
- Body Length [ADAQ]
- 3.120 Inches Nominal
- Center Hole Diameter [ADYT]
- 1.140 Inches Nominal
- Design Type [APGF]
- Single Centrally Located Hole And Split
- Flange Diameter [ABKK]
- 2.000 Inches Nominal
- Flange Height [AHGD]
- 1.880 Inches Nominal
- Material Document And Classification [MDCL]
- Mil-R-3065 Mil Spec Single Material Response
- Material [MATT]
- Rubber Polyisoprene Natural Class Nr Or Rubber Isobutylene-Isoprene Class Iir Or Rubber Butadiene-Styrene Class Sbr Or Rubber Polysulfide Class T Or Rubber Butadiene-Acrylonitrile Class Nbr Or Rubber Chloroprene Class Cr Or Rubber Silicone Class Q Or Rubber Polyacrylate Class Acm
- Overall Length [ABHP]
- 5.000 Inches Nominal
- Style Designator [STYL]
- Round Flanged
Weapon Systems (WSDC) 5365-01-200-6047
DLA Procurement Analysis 5365-01-200-6047
- Last Stock Position:
- 164 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-01-200-6047
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5365-01-200-6047
Freight Information 5365-01-200-6047
5365-01-200-6047 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 156600. A Sub NMFC of Z. It has a NMFC Description of PLASTIC/RUBBER ARTICLE VIZ:. 5365-01-200-6047 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5365-01-200-6047 is rated as a variable freight class when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 77670 which rates the freight between FCL and LCL. 5365-01-200-6047 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 772 for ocean manifesting and military sealift. 5365-01-200-6047 is not classified as a special type of cargo when transported by water. 5365-01-200-6047 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5365-01-200-6047 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: