Premium Information is available for this item - Upgrade for $1 a day
5365-01-190-2321
Plate Spacer
5365011902321 011902321 13027477
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. View more Plate Spacer
January 2023
18
Marketplace 5365-01-190-2321
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-190-2321 2+ Documents (More...)
Restrictions 5365-01-190-2321
5365-01-190-2321 is a Plate Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5365-01-190-2321
- France (ZF01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5365-01-190-2321
- Part Number
- Manufacturer
- Status
- 13027477
- Manufacturer
- 18876 - Us Army Aviation And Missile Command (Active)
- Primary Buy
- Primary Buy
- 13027477
- 26772 - Wego Precision Machine, Inc. (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 13027477
- 1Y547 - Row Manufacturing (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5365-01-190-2321
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Overall Length [ABHP]
- 35.0 Millimeters Nominal
- Overall Width [ABMK]
- 10.0 Millimeters Nominal
NATO Stock Numbers Related to 5365-01-190-2321
Freight Information 5365-01-190-2321
5365-01-190-2321 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 013120. A Sub NMFC of F. It has a NMFC Description of ALUMINUM ARTICLE NOI SUB 6. 5365-01-190-2321 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. 5365-01-190-2321 is rated as class 100 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 05380 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5365-01-190-2321 is not classified as a special type of cargo when transported by water. 5365-01-190-2321 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.