Premium Information is available for this item - Upgrade for $1 a day

5365-01-185-8325

Plate Spacer

5365011858325 011858325 2204815-4

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET&#59; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. View more Plate Spacer

5365-01-185-8325 SPACER,PLATE 5365011858325 011858325

Managed by United States
NSN Created on 4 Aug 1984
Data Last Changed
November 2023
NATO Update Count
5
NATO Data Quality
5365-01-185-8325 SPACER,PLATE 5365011858325 011858325 1/1
NSN 5365-01-185-8325 (Generic Image) 1/1

5365-01-185-8325 Stock and Availability Marketplace 5365-01-185-8325

5365-01-185-8325 Demil Restrictions 5365-01-185-8325

DEMIL: A | DEMILI: 1 | CRITICALITY: X | HMIC: N | PMIC: A | EDC: | ADPEC:

5365-01-185-8325 is a Plate Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.

5365-01-185-8325 End Users End Users 5365-01-185-8325

US Army (A919)
Effective Date:
1 Jul 2006
Former MOE Rule:
A180
Supplementary Receivers:
AZ
US Marine Corps (MC41)
Effective Date:
1 Jul 2006

5365-01-185-8325 Manufacturers Approved Sources 5365-01-185-8325

5365-01-185-8325 Technical Data Datasheet 5365-01-185-8325

Characteristic
Specifications
FIIG
A07000
Aperture Diameter [ABVL]
3.090 Inches Minimum And 3.110 Inches Maximum
Bolt Circle Diameter [ABKG]
3.794 Inches Nominal
Bolt Hole Quantity [AECS]
4
Features Provided [CBBL]
Casehardened
Hardness Rating [CQFM]
96.0 Rockwell C Nominal
Hole Diameter [AAUB]
0.280 Inches Minimum And 0.290 Inches Maximum
Outside Diameter [ABKV]
4.370 Inches Minimum And 4.380 Inches Maximum
Special Features [FEAT]
Four (4)Holes 0.153 Min. Dia; 0.162 Max. Dia.,Two (2)Holes 0.141 Min. Dia. 0.150 Max. Dia; Located On 3.466 In. Bolt Circle Dia;

5365-01-185-8325 Weapon Systems (WSDC) Weapon Systems (WSDC) 5365-01-185-8325

5365-01-185-8325 Stock, Inventory and Procurement DLA Procurement Analysis 5365-01-185-8325

Last Stock Position:
742 In Stock
DLA Administrative Lead Time:
Subscribe
DLA Production Lead Time:
Subscribe
Subscribe to View DLA Inventory and Forecast...

5365-01-185-8325 Management Data Management Data 5365-01-185-8325

Effective Date
Organization
Unit of Issue
Unit Price
Qty Unit Pack
Oct 2022
US Marine Corps (DM)
EA
Subscribe
1
Oct 2021
Defense Logistics Agency (DS)
EA
Subscribe
1
Jun 2021
Defense Logistics Agency (DS)
EA
Subscribe
1
Oct 2020
US Marine Corps (DM)
EA
Subscribe
1
Nov 2019
Department of the Army (DA)
EA
Subscribe
1

Army Army

Materiel Category and Inventory Manager:
T
Industrial Supplies (DLA/GSA Items)
Appropriation and Budget Activity:
2
Stock Fund Secondary Items
Management Inventory Segment:
2
Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
Weapons System / End Item / Homogeneous Group:
00
DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements:
X
Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.

Marine Corps Marine Corps

Stores Account:
1
Stock Fund Account Item
Combat Essentiality:
5
Critical Repair Part to a Combat Essential End Item
Echelon Management:
B2
Operational Test:
No Special Procedures

5365-01-185-8325 Related Items NATO Stock Numbers Related to 5365-01-185-8325

5365-01-185-8325 Freight Data Freight Information 5365-01-185-8325

5365-01-185-8325 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 115620. A Sub NMFC of X. It has a NMFC Description of BUSHINGS NOI I/S. 5365-01-185-8325 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 59240 which rates the freight between FCL and LCL. 5365-01-185-8325 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-185-8325 is not classified as a special type of cargo when transported by water. 5365-01-185-8325 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.

5365-01-185-8325 Packaging Data Packaging Data 5365-01-185-8325

Responsible Activity
Packaging Data Source
Primary Inventory Control Activity (PICA)
--

Item Pack Level (Unpackaged)

Item Size
Item Weight
Characteristics
Weight/Dimensions Category
Fragility
Item Preservation
--
--
Electrical Instrument
2lb or less, one dimension 2" or less, other dimensions less than 24"
Above 110G
Special Requirement

Unit Pack Level (Packaged)

Quantity per Pack
Unit Size
Unit Weight
Unit Cube
Preservation Method
Cleaning/Drying
1
5.5" H x 5.5" W x 0.2" L
--
--
Physical Protection
Any Suitable Process
Preservation Material
Wrapping Material
Cushioning/Dunnage
Cushioning Thickness
Container
Special Marking
--
--
--
--
Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
No special marking

Intermediate Pack Level

Quantity of Unit Packs
Container
PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box

5365-01-185-8325 Procurement History Procurement History 5365-01-185-8325 12 Records

Contract
Date
CAGE
Quantity
Net Price
Std Price
SPE4A222F4725
27 Apr 2022
Subscribe
1
Subscribe
Subscribe
SPE4A222F4725
27 Apr 2022
Subscribe
1
Subscribe
Subscribe
SPE4A222F3535
02 Mar 2022
Subscribe
1
Subscribe
Subscribe
SPE4A222F3420
22 Feb 2022
Subscribe
2
Subscribe
Subscribe
SPE4A222F3420
22 Feb 2022
Subscribe
2
Subscribe
Subscribe
SPE4A222F2412
11 Jan 2022
Subscribe
50
Subscribe
Subscribe
SPE4A222F2412
11 Jan 2022
Subscribe
50
Subscribe
Subscribe
SPE4A222F1690
02 Dec 2021
Subscribe
69
Subscribe
Subscribe
SPE4A222F1690
02 Dec 2021
Subscribe
69
Subscribe
Subscribe
SPE4A222F0875
27 Oct 2021
Subscribe
2
Subscribe
Subscribe
SPM4AX13D94020968
02 Aug 2016
Subscribe
677
Subscribe
Subscribe
SPE74002D97190172
29 Jan 2013
Subscribe
354
Subscribe
Subscribe

5365-01-185-8325 Contracting Technical Data File (CTDF) Contracting Technical Data File (CTDF) 5365-01-185-8325 October 2021

Criticality and Quality

Critical Item Code:
X
Flight Safety:
Life Support:
Certified Samples:
Serialization:
First Article Test (FAT):
Certificate of Quality Compliance:
Production Lot Testing:
Special Testing:
Qualified Products List (QPL):

Commercial Properties

Government Furnished Material:
Government Furnished Tooling:
Government Furnished Property:
Price Evaluation Code:
Diminshing Manufacturing Sources:
Warranty:
Commerical Off The Shelf (COTS):
End Item Application:
Auctioning Candidate:
Source of Procurement:
Contract Option:

Restrictions

Boeing Rights Guard:
Export Controlled:
Controlled Technical Data Package (TDP):
Restricted Technical Data Package (TDP):
Contains Classified Material
Weapons System Indicator Code (WSIC):
F

Packaging Requirements

Packaging Determination Table:
Packaging Review Code:
Special Packaging Instruction Number (SPIN):
Special Packaging Instruction Number Revision:
Special Packaging Instruction Number Date:
Pallet Reference Number Required: