Premium Information is available for this item - Upgrade for $1 a day
5365-01-160-8121
Plate Spacer
5365011608121 011608121 12299322-2 10087091 12299322
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. View more Plate Spacer
November 2023
19
Marketplace 5365-01-160-8121
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-160-8121 5+ Documents (More...)
RQST NE Updated Every Day 5365-01-160-8121 RQST Updated Every Day 5365-01-160-8121 RQST NE Related Documents
5365-01-160-8121 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-160-8121
81217010151608121151608121 STAMP.DL6600 Restrictions https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-160-8121
Plate Spacer 5365011608121 011608121 vendors Request Updated Every Day 5365-01-160-8121 https//
Plate Spacer 5365011608121 011608121 United States (US) 4. 5365-01-160-8121 Marketplace Restrictions
Approved Sources Datasheet Management RQST NE Updated Every Day 5365-01-160-8121 RQST Updated Every
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 12299322
for $1 a day Upgrade your Account Upgrade 5365- 01-134-3806Shim5365011343806 01134380612299322 -2 10087091
-3 10087092 12299322 A flat metal or plastic item of various peripheral shapes having a solid (not
- Upgrade for $1 a day Upgrade your Account Upgrade 5365-01-134-3806Shim5365011343806 011343806 12299322
Restrictions 5365-01-160-8121
5365-01-160-8121 is a Plate Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-160-8121
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-160-8121
- US Army (A919)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- A180
- Supplementary Receivers:
- AZBD
- Finland (WF01)
- Effective Date:
- 1 Feb 2008
- France (ZF01)
- Effective Date:
- 1 Apr 1991
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Mar 1999
- United Kingdom (ZK01)
- Effective Date:
- 1 Nov 2010
- Italy (ZR01)
- Effective Date:
- 1 Apr 1991
- Denmark (ZS01)
- Effective Date:
- 1 Aug 1997
- Turkey (ZW01)
- Effective Date:
- 1 Dec 2005
- NATO Maintenance and Supply Agency (ZX01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5365-01-160-8121
- Part Number
- Manufacturer
- Status
- 12299322-2
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
- 10087091
- A486G - Nimikkeistokeskus Ncb Finland (Active)
- NATO Reference
- NATO Reference
- 12299322
- 19207 - U S Army Tank Automotive Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5365-01-160-8121
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Material [MATT]
- Aluminum Alloy 5083
- Bolt Hole Quantity [AECS]
- 7
- Style Designator [STYL]
- Non-Circular W/Bolt Holes
- Hole Diameter [AAUB]
- 0.625 Inches Nominal
- Overall Length [ABHP]
- 6.620 Inches Nominal
- Overall Width [ABMK]
- 3.500 Inches Nominal
- Aperture Diameter [ABVL]
- 1.062 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Width [ADUY]
- 2.500 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 2.875 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Width [ADVD]
- 0.500 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.500 Inches Nominal
Weapon Systems (WSDC) 5365-01-160-8121
DLA Procurement Analysis 5365-01-160-8121
- Last Stock Position:
- 19 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-01-160-8121
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 5365-01-160-8121
Freight Information 5365-01-160-8121
5365-01-160-8121 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5365-01-160-8121 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. 5365-01-160-8121 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5365-01-160-8121 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-160-8121 is not classified as a special type of cargo when transported by water. 5365-01-160-8121 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-160-8121
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5365-01-160-8121 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: