Premium Information is available for this item - Upgrade for $1 a day
5365-01-125-7507
Plate Spacer
5365011257507 011257507 MBEU-65904
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. View more Plate Spacer
May 2023
10
Marketplace 5365-01-125-7507
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-125-7507 5+ Documents (More...)
RQST NE Updated Every Day 5365-01-125-7507 RQST Updated Every Day 5365-01-125-7507 RQST NE Related Documents
5365-01-125-7507 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-125-7507
011257507 United States (US) 4. 5365-01-125-7507 Marketplace Updated Every Day 5962-25-125-7507 RQST
instructions how to enable JavaScript in your web browser https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-125-7507
Plate Spacer 5365011257507 011257507 5365-01-125-7507 5+ Documents ( More... ) https//www.nsnlookup.com
/fsg-53/fsc-5365/us 5365-01-125-7507 RQST Updated Every Day 5365-01-125-7507 RQST NE Related Documents
011257507 United States (US) 4. 5365-01-125-7507 Marketplace https//www.nsnlookup.com /fsg-76/fsc-7610
Plate Spacer 5365011257507 011257507 RQST NE Updated Every Day 5365-01-125-7507 RQST Updated Every
Plate Spacer 5365011257507 011257507 for $1 a day Upgrade your Account Upgrade 5365-01-125-7507Plate
Spacer5365011257507 011257507 MBEU-65904 https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-125-7507
Restrictions 5365-01-125-7507
5365-01-125-7507 is a Plate Spacer Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5365-01-125-7507
- US Navy (N1R5)
- Effective Date:
- 8 Jun 2009
- Supplementary Receivers:
- GG
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5365-01-125-7507
- Part Number
- Manufacturer
- Status
- MBEU-65904
- Manufacturer
- U1604 - Martin-Baker Aircraft Company (Active)
- Primary Buy
- Primary Buy
Datasheet 5365-01-125-7507
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Aperture Diameter [ABVL]
- 0.437 Inches Nominal
- Bolt Hole Quantity [AECS]
- 4
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 1.687 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Width [ADUY]
- 1.062 Inches Nominal
- Hole Diameter [AAUB]
- 0.199 Inches Nominal
- Outside Corner Radius [ADPW]
- 0.220 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.219 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Width [ADVD]
- 0.219 Inches Nominal
- Overall Length [ABHP]
- 2.125 Inches Nominal
- Overall Width [ABMK]
- 1.500 Inches Nominal
DLA Procurement Analysis 5365-01-125-7507
Similar Supply Items to 5365-01-125-7507
Freight Information 5365-01-125-7507
5365-01-125-7507 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 013120. A Sub NMFC of F. It has a NMFC Description of ALUMINUM ARTICLE NOI SUB 6. 5365-01-125-7507 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. 5365-01-125-7507 is rated as class 100 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 05380 which rates the freight between FCL and LCL. 5365-01-125-7507 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5365-01-125-7507 is not classified as a special type of cargo when transported by water. 5365-01-125-7507 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-125-7507
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- 5.0" H x 2.0" W x 0.5" L
- --
- --
- Physical Protection
- Any Suitable Process
- 5.0" H x 2.0" W x 0.5" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
- --
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box