Premium Information is available for this item - Upgrade for $1 a day
5365-01-110-9496
Shim
5365011109496 011109496 CP494-1 CP494-1A
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
November 2023
5
Marketplace 5365-01-110-9496
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-110-9496 5+ Documents (More...)
Shim 5365011109496 011109496,CP494-1 item - Upgrade for $1 a day Upgrade your Account Upgrade 5365
-01-110-9496Shim5365011109496 011109496 CP494 -1 CP494-1A A thin flat metal or plastic item of various
Shim 5365011109496 011109496,CP494-1 5365-01-110-9496 5365011109496 011109496 is a thin flat metal
Shim 5365011109496 011109496,CP494-1 5365-01-110-9496 5365011109496 011109496 is a thin flat metal
Shim 5365011109496 011109496,CP494-1 5365-01-110-9496 5365011109496 011109496 is a thin flat metal
Restrictions 5365-01-110-9496
5365-01-110-9496 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5365-01-110-9496
- NASA (G100)
- Effective Date:
- 1 Apr 1991
Approved Sources 5365-01-110-9496
- Part Number
- Manufacturer
- Status
- CP494-1
- Manufacturer
- 56848 - United States Department Of Treasury (Active)
- Incomplete Reference
- Incomplete Reference
- CP494-1A
- 56848 - United States Department Of Treasury (Active)
- Primary Buy
- Primary Buy
Datasheet 5365-01-110-9496
- Characteristic
- Specifications
- Material [MATT]
- Specifications
- Copper Alloy
- Construction [CQCF]
- One-Piece
- Bolt Hole Quantity [AECS]
- 4
- Hole Diameter [AAUB]
- 0.250 Inches Nominal
- Overall Length [ABHP]
- 3.312 Inches Nominal
- Overall Width [ABMK]
- 1.312 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Width [ADUY]
- 0.688 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 2.688 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Width [ADVD]
- 0.312 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.312 Inches Nominal
- Special Features [FEAT]
- For Friction Block Assembly,No. 6 Bliss Coin Press
NATO Stock Numbers Related to 5365-01-110-9496
Freight Information 5365-01-110-9496
5365-01-110-9496 has freight characteristics.. 5365-01-110-9496 has a variance between NMFC and UFC when transported by rail and the description should be consulted.