Premium Information is available for this item - Upgrade for $1 a day
5365-01-096-6082
Machine Thread Bushing
5365010966082 010966082 3261714-1
A straight nonfluid fitting with wrenching facilities on one end and external threads, other than pipe or hose series, on the other end. It has an unthreaded through hole in its axis which may be countersunk and/or counterbored on one or both ends. It is designed to accommodate a shaft, or the like, or used to reinforce a hole in a bulkhead, or the like. For similar items specifically designed for use in a stuffing box, see PACKING NUT. For nonfluid items with an internal thread, see INSERT, SCREW THREAD; or ADAPTER BUSHING. Excludes REDUCER, BOSS; and items designed to accommodate a tube or tube fitting. View more Machine Thread Bushing
May 2023
6
Marketplace 5365-01-096-6082
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-096-6082 1+ Documents (More...)
Updated Every Day 5365-01-096-6082 RQST NE Related Documents 5365-01-096-6082 1+ Documents ( More...
) https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-096-6082 Machine Thread Bushing 5365010966082
Restrictions 5365-01-096-6082
5365-01-096-6082 is a Machine Thread Bushing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5365-01-096-6082
- US Air Force (FXGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FXCX
Approved Sources 5365-01-096-6082
- Part Number
- Manufacturer
- Status
- 3261714-1
- Manufacturer
- 82577 - Raytheon Company (Active)
- Primary Buy
- Primary Buy
Datasheet 5365-01-096-6082
- Characteristic
- Specifications
- FIIG
- Specifications
- A540S0
- Counterbore Depth [AAWZ]
- 0.215 Inches Minimum And 0.265 Inches Maximum
- Counterbore Diameter [AAWY]
- 0.156 Inches Nominal
- Countersink Angle In Deg [AATA]
- 60.0
- Countersink Depth [ADBD]
- 0.070 Inches Nominal
- Counterbore Location [BDYS]
- Threaded End
- Countersink Location [BQDD]
- Wrenching End
- Features Provided [CBBL]
- Counterbore And Countersunk
- Material Document And Classification [MDCL]
- Qq-S-764, Cond B Fed Spec Single Material Response
- Material [MATT]
- Steel Comp 303
- Nominal Thread Size [CQJX]
- 0.250 Inches
- Screw Thread Length [AJYR]
- 0.350 Inches Minimum And 0.360 Inches Maximum
- Slot Width [ABGC]
- 0.030 Inches Nominal
- Slot Depth [AAZT]
- 0.015 Inches Nominal
- Overall Length [ABHP]
- 0.465 Inches Minimum And 0.515 Inches Maximum
- Width Across Flats [ASDB]
- 0.312 Inches Nominal
- Wrenching Facility Shape [ACSL]
- Slotted
- Thickness [ABNM]
- 0.065 Inches Minimum And 0.085 Inches Maximum
- Thread Direction [AAJF]
- Right-Hand
- Thread Series Designator [THSD]
- Unf
- Thread Quantity Per Inch [CMLP]
- 28
DLA Procurement Analysis 5365-01-096-6082
Management Data 5365-01-096-6082
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5365-01-096-6082
Freight Information 5365-01-096-6082
5365-01-096-6082 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 5365-01-096-6082 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. 5365-01-096-6082 is rated as class 77.5 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 5365-01-096-6082 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-096-6082 is not classified as a special type of cargo when transported by water. 5365-01-096-6082 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5365-01-096-6082 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: