Premium Information is available for this item - Upgrade for $1 a day
5365-01-086-8198
Machine Thread Bushing
5365010868198 010868198 D34004988-001
A straight nonfluid fitting with wrenching facilities on one end and external threads, other than pipe or hose series, on the other end. It has an unthreaded through hole in its axis which may be countersunk and/or counterbored on one or both ends. It is designed to accommodate a shaft, or the like, or used to reinforce a hole in a bulkhead, or the like. For similar items specifically designed for use in a stuffing box, see PACKING NUT. For nonfluid items with an internal thread, see INSERT, SCREW THREAD; or ADAPTER BUSHING. Excludes REDUCER, BOSS; and items designed to accommodate a tube or tube fitting. View more Machine Thread Bushing
May 2023
5
Marketplace 5365-01-086-8198
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-086-8198 1+ Documents (More...)
Updated Every Day 5365-01-086-8198 RQST NE Related Documents 5365-01-086-8198 1+ Documents ( More...
) https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-086-8198 Machine Thread Bushing 5365010868198
Restrictions 5365-01-086-8198
5365-01-086-8198 is a Machine Thread Bushing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5365-01-086-8198
- US Air Force (FXGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FXCX
Approved Sources 5365-01-086-8198
- Part Number
- Manufacturer
- Status
- D34004988-001
- Manufacturer
- 09128 - Honeywell International Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 5365-01-086-8198
- Characteristic
- Specifications
- FIIG
- Specifications
- A540S0
- Diameter [ABMZ]
- 0.890 Inches Minimum And 0.910 Inches Maximum
- Hole Inside Diameter [BXBR]
- 0.710 Inches Minimum And 0.730 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-A-225/8, T6 Fed Spec Single Material Response
- Material [MATT]
- Aluminum Alloy 6061
- Nominal Thread Size [CQJX]
- 0.875 Inches
- Screw Thread Length [AJYR]
- 0.330 Inches Nominal
- Slot Width [ABGC]
- 0.101 Inches Minimum And 0.111 Inches Maximum
- Slot Depth [AAZT]
- 0.100 Inches Nominal
- Overall Length [ABHP]
- 0.640 Inches Minimum And 0.660 Inches Maximum
- Wrenching Facility Shape [ACSL]
- Face Spanner
- Surface Treatment Document And Classification [STDC]
- Mil-C-5541, Class 3 Mil Spec Single Treatment Response
- Surface Treatment [SFTT]
- Chromate
- Thread Direction [AAJF]
- Right-Hand
- Thread Series Designator [THSD]
- Uns
- Thread Quantity Per Inch [CMLP]
- 32
Weapon Systems (WSDC) 5365-01-086-8198
DLA Procurement Analysis 5365-01-086-8198
Management Data 5365-01-086-8198
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- NT
- AIRCRAFT INSTRUMENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5365-01-086-8198
Freight Information 5365-01-086-8198
5365-01-086-8198 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 115620. A Sub NMFC of X. It has a NMFC Description of BUSHINGS NOI I/S. 5365-01-086-8198 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 59240 which rates the freight between FCL and LCL. 5365-01-086-8198 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-086-8198 is not classified as a special type of cargo when transported by water. 5365-01-086-8198 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5365-01-086-8198 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: