Premium Information is available for this item - Upgrade for $1 a day
5365-01-084-3944
Shim
5365010843944 010843944 403163
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
May 2023
7
Marketplace 5365-01-084-3944
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-084-3944 5+ Documents (More...)
Updated Every Day 5365-01-084-3944 RQST NE Related Documents 5365-01-084-3944 5+ Documents ( More...
) https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-084-3944 Shim 5365010843944 010843944,403163
https//www.nsnlookup.com /fsg-40/fsc-4030/us 4030-01-691-9944 Rope Thimble 4030016919944016919944 403163
Upgrade for $1 a day Upgrade your Account Upgrade 4030-01- 691-9944Rope Thimble4030016919944 016919944 403163
Preformed Packing 5331009139897009139897 1618Guy Wire Assy Cable4920003041618 003041618 145504534 403163
-6925 Conductor Bus 6150008396925 008396925,403163 1618Guy Wire Assy Cable4920003041618 003041618 403163
www.nsnlookup.com /fsg-59/fsc-5998/us 5998-01-050-9456 Circuit Card Assembly 5998010509456010509456 403163
Shim 5365010843944 010843944,403163 003041618 403163 4534 Nomenclatu Document 7610145504534 145504534
/www.nsnlookup.com /fsg-53/fsc-5331/us 5331-00-913-9897 Preformed Packing 5331009139897 009139897 403163
enable JavaScript in your web browser . 4920-00-304-1618Guy Wire Assy Cable4920003041618 003041618 403163
Restrictions 5365-01-084-3944
5365-01-084-3944 is a Shim that does not have a nuclear hardened feature, but does have another critical feature or features such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5365-01-084-3944
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-084-3944
- US Air Force (FUGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FUCX
Approved Sources 5365-01-084-3944
- Part Number
- Manufacturer
- Status
- 403163
- Manufacturer
- 45934 - Ontic Engineering & Manufacturing, (Active)
- Primary Buy
- Primary Buy
- 403163
- 3HRL4 - Goodrich Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 403163
- 3CPE0 - Safran Power Usa Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 403163
- 45834 - Microcellular Products Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 403163
- 00462 - Goodrich Corporation (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5365-01-084-3944
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Aperture Diameter [ABVL]
- 0.221 Inches Nominal
- Construction [CQCF]
- One-Piece
- Fsc Application Data [ZZZV]
- Motor,Ac,Nose Landing Gear
- Material Document And Classification [MDCL]
- Qq-B-613 Fed Spec Single Material Response
- Material [MATT]
- Copper Alloy 268
- Overall Length [ABHP]
- 1.125 Inches Nominal
- Special Features [FEAT]
- Arc Shaped Item,Outside Curve Radius 2.188 In.; Bolt Circle Radius 2.000 In.; And Inside Curve Radius 1.844 In.; And Aperture Centered On Length
Weapon Systems (WSDC) 5365-01-084-3944
DLA Procurement Analysis 5365-01-084-3944
Management Data 5365-01-084-3944
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- LE
- LANDING GEAR SYSTEMS AND COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5365-01-084-3944
Freight Information 5365-01-084-3944
5365-01-084-3944 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 106940. A Sub NMFC of X. It has a NMFC Description of SPACERS/SEPARATORS I/S NOI TUBULAR. 5365-01-084-3944 is rated as class 55 when transported by Less-Than Truckload (LTL) freight. 5365-01-084-3944 is rated as class 55 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 50675 which rates the freight between FCL and LCL. 5365-01-084-3944 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-084-3944 is not classified as a special type of cargo when transported by water. 5365-01-084-3944 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-084-3944
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 5365-01-084-3944 2 Records
Contracting Technical Data File (CTDF) 5365-01-084-3944 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: