Premium Information is available for this item - Upgrade for $1 a day
5365-01-077-2894
Plate Spacer
5365010772894 010772894 9184M41P09 P23TF3 5362-A312-00014 P1TF10 REV S8 P1TF3 REV AE
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. View more Plate Spacer
November 2023
4
Marketplace 5365-01-077-2894
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-077-2894 5+ Documents (More...)
/fsg-31/fsc-3120/us
5365-A312-00014 A flat metal or plastic item of various peripheral shapes having a solid ( P23TF3
Plate Spacer 5365010772894 010772894 a day Upgrade your Account Upgrade 5365-01-077-2894Plate Spacer5365010772894
P23TF3 SPACER,PLATE 101 EA NS Request Quotation P1TF3 SPACER,PLATE 66 EA NS Request Quotation FedMall
P1TF3 WASHER,KEY 66 EA NS Request Quotation P23TF3 WASHER,KEY 101 EA NS Request Quotation FedMall Updated
P1TF3 WASHER,KEY 66 EA NS Request Quotation P23TF3 WASHER,KEY 101 EA NS Request Quotation FedMall Updated
P1TF3 07482 - General Electric Company (Active) Informational Drawing RNCC D RNVC 9 MEDALS DAC A P23TF3
/fsg-31/fsc-3120/us
NumberManufacturerStatus1462M81P08 07482 - General Electric Company (Active) Primary Buy RNCC 3 RNVC 2 DAC A P23TF3
Restrictions 5365-01-077-2894
5365-01-077-2894 is a Plate Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5365-01-077-2894
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-077-2894
- US Air Force (FXGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FXCX
Approved Sources 5365-01-077-2894
- Part Number
- Manufacturer
- Status
- 9184M41P09
- Manufacturer
- 07482 - General Electric Company (Active)
- Primary Buy
- Primary Buy
- P23TF3
- 07482 - General Electric Company (Active)
- Informational Drawing
- Informational Drawing
- 5362-A312-00014
- 13873 - Dla Aviation Engineering (Active)
- Informational Drawing
- Informational Drawing
- P1TF10 REV S8
- 07482 - General Electric Company (Active)
- Informational Drawing
- Informational Drawing
- P1TF3 REV AE
- 07482 - General Electric Company (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5365-01-077-2894
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Bolt Hole Quantity [AECS]
- 2
- Bolt Hole Centerline To Nearest Edge Distance [ADVJ]
- 0.360 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 0.860 Inches Minimum And 0.880 Inches Maximum
- Hole Diameter [AAUB]
- 0.293 Inches Minimum And 0.307 Inches Maximum
- Material [MATT]
- Aluminum Alloy 5052
- Material Document And Classification [MDCL]
- Ams 4017 Assn Std Single Material Response
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.795 Inches Nominal
- Overall Length [ABHP]
- 1.560 Inches Minimum And 1.620 Inches Maximum
- Overall Width [ABMK]
- 0.700 Inches Minimum And 0.740 Inches Maximum
- Special Features [FEAT]
- Color Green
- Surface Treatment [SFTT]
- Anodize
Weapon Systems (WSDC) 5365-01-077-2894
DLA Procurement Analysis 5365-01-077-2894
- Last Stock Position:
- 12 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-01-077-2894
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- NY
- GENERAL ELECTRIC ENGINES & COMPONENTS, TF-39
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5365-01-077-2894
Freight Information 5365-01-077-2894
5365-01-077-2894 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5365-01-077-2894 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. 5365-01-077-2894 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5365-01-077-2894 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5365-01-077-2894 is not classified as a special type of cargo when transported by water. 5365-01-077-2894 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-077-2894
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- 25
- --
Contracting Technical Data File (CTDF) 5365-01-077-2894 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: