Premium Information is available for this item - Upgrade for $1 a day
5365-01-067-3514
Plate Spacer
5365010673514 010673514 264285702-0016 2642-857-02 ITEM 16 4558796-0016
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. View more Plate Spacer
November 2023
5
Marketplace 5365-01-067-3514
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-067-3514 3+ Documents (More...)
BUY NE FedMall Updated Every Day 5365-01-067-3514 RQST NE Updated Every Day 5365-01-067-3514 RQST
Updated Every Day 5365-01-067-3514 RQST NE Related Documents 5365-01-067-3514 3+ Documents ( More...
Plate Spacer 5365010673514 010673514 www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-067-3514 https
4558796-0016 2642-857-02 ITEM 16D4 845-4558795 ITEM 36D4 7383858-264285701-36D4 H547-0001-264285701
02 ITEM 16D4845-4558795 https//www.nsnlookup.com https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-067-3514
Restrictions 5365-01-067-3514
5365-01-067-3514 is a Plate Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-067-3514
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-067-3514
- US Navy (N9BG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 5365-01-067-3514
- Part Number
- Manufacturer
- Status
- 264285702-0016
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- 2642-857-02 ITEM 16
- 96169 - Electric Boat Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4558796-0016
- 96169 - Electric Boat Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5365-01-067-3514
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Material [MATT]
- Copper Alloy
- Overall Thickness [ADUM]
- 1.562 Inches Nominal
- Bolt Hole Quantity [AECS]
- 6
- Style Designator [STYL]
- Non-Circular W/Bolt Holes
- Hole Diameter [AAUB]
- 0.812 Inches Nominal
- Overall Length [ABHP]
- 6.750 Inches Nominal
- Overall Width [ABMK]
- 6.500 Inches Nominal
- Aperture Diameter [ABVL]
- 3.062 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Width [ADUY]
- 2.300 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 5.250 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Width [ADVD]
- 0.950 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.750 Inches Nominal
- Special Features [FEAT]
- Bolt Holes Are Countersunk
Weapon Systems (WSDC) 5365-01-067-3514
DLA Procurement Analysis 5365-01-067-3514
- Last Stock Position:
- 7 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-01-067-3514
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5365-01-067-3514
Freight Information 5365-01-067-3514
5365-01-067-3514 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 114870. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING METAL. 5365-01-067-3514 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58890 which rates the freight between FCL and LCL. 5365-01-067-3514 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-067-3514 is not classified as a special type of cargo when transported by water. 5365-01-067-3514 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-067-3514
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5365-01-067-3514 4 Records
Contracting Technical Data File (CTDF) 5365-01-067-3514 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: