Premium Information is available for this item - Upgrade for $1 a day
5365-01-064-2852
Shim
5365010642852 010642852 12012146-3 450-017-013
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
November 2023
36
Marketplace 5365-01-064-2852
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-064-2852 5+ Documents (More...)
for $1 a day Upgrade your Account Upgrade 5365-01-057-0060Shim5365010570060 010570060 12012146-1 450-017-013
NumberManufacturerStatus12012146-1 19204 - Army, United States Department Of (Active) Primary Buy RNCC 3 RNVC 2 MEDALS DAC 1 450-017-013
for $1 a day Upgrade your Account Upgrade 5365-01-057-0060Shim5365010570060 010570060 12012146-1 450-017-013
NumberManufacturerStatus12012146-1 19204 - Army, United States Department Of (Active) Primary Buy RNCC 3 RNVC 2 MEDALS DAC 1 450-017-013
NumberManufacturerStatus12012146-1 19204 - Army, United States Department Of (Active) Primary Buy RNCC 3 RNVC 2 MEDALS DAC 1 450-017-013
Restrictions 5365-01-064-2852
5365-01-064-2852 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-064-2852
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-064-2852
- US Army (A919)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- A180
- Supplementary Receivers:
- AZBF
- US Navy (N9BG)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Austria (WB01)
- Effective Date:
- 1 Feb 2005
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Kuwait (YK01)
- Effective Date:
- 1 Feb 2015
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Germany (ZG01)
- Effective Date:
- 1 Jan 2015
- Republic of Korea (ZH01)
- Effective Date:
- 1 Dec 1997
- Netherlands (ZN01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Aug 1995
- Turkey (ZW01)
- Effective Date:
- 1 Jul 2003
Approved Sources 5365-01-064-2852
- Part Number
- Manufacturer
- Status
- 12012146-3
- Manufacturer
- 19204 - Army, United States Department Of (Active)
- Primary Buy
- Primary Buy
- 450-017-013
- 85336 - Barnes & Reinecke Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5365-01-064-2852
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Bolt Hole Quantity [AECS]
- 4
- Center To Center Distance Between Bolt Holes Along Width [ADUY]
- 3.000 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 1.380 Inches Nominal
- Construction [CQCF]
- Laminated
- Features Provided [CBBL]
- Nonseparable
- Hole Diameter [AAUB]
- 0.437 Inches Nominal
- Material [MATT]
- Copper Alloy
- Outside Corner Radius [ADPW]
- 0.120 Inches Nominal
- Lamination Quantity [BRDX]
- 16
- Lamination Thickness [BRDY]
- 0.002 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.500 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Width [ADVD]
- 0.500 Inches Nominal
- Overall Length [ABHP]
- 4.000 Inches Nominal
- Overall Width [ABMK]
- 2.380 Inches Nominal
- Style Designator [STYL]
- Non-Circular W/Bolt Holes
Weapon Systems (WSDC) 5365-01-064-2852
DLA Procurement Analysis 5365-01-064-2852
- Last Stock Position:
- 299 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-01-064-2852
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5365-01-064-2852
Freight Information 5365-01-064-2852
5365-01-064-2852 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 175120. A Sub NMFC of Z. It has a NMFC Description of SHEET STEEL ARTICLES NOI. 5365-01-064-2852 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5365-01-064-2852 is rated as a variable freight class when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 85920 which rates the freight between FCL and LCL. 5365-01-064-2852 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5365-01-064-2852 is not classified as a special type of cargo when transported by water. 5365-01-064-2852 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-064-2852
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5365-01-064-2852 1 Records
Contracting Technical Data File (CTDF) 5365-01-064-2852 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: