Premium Information is available for this item - Upgrade for $1 a day
5365-01-055-9692
Plate Spacer
5365010559692 010559692 35457
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. View more Plate Spacer
November 2023
15
Marketplace 5365-01-055-9692
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-055-9692 5+ Documents (More...)
Wahidullah Ahmadzai Ltd Frequently Asked Questions (FAQ) for CAGE 35457 What is CAGE Code 35457?
35457 is the unique identifier used by NATO Organizations to reference the physical entity known as Knechtel
) CA 4. 35457 Knechtel Furniture Ltd is a Discontinued Manufacturer with the Cage Code 35457. https/
https//www.nsnlookup.com /cage Knechtel Furniture Ltd (CAGE Code 35457) CA 4. 35457 Knechtel Furniture
HOUSING,LIGHT 10 EA NS Request Quotation 35457 HOUSING,LIGHT 10 EA NS Request Quotation Updated Every
) CA 4. 35457 Knechtel Furniture Ltd is a Discontinued Manufacturer with the Cage Code 35457.
/fsg-47/fsc-4730/fr
238-9825 5+ Documents ( More... ) https//www.nsnlookup.com /cage Knechtel Furniture Ltd (CAGE Code 35457
) CA 4. 35457 Knechtel Furniture Ltd is a Discontinued Manufacturer with the Cage Code 35457.
NATO Organizations to reference the physical entity known as Empress Marketing & Suns, Llc located at 35457
9AS22 refers to Empress Marketing & Suns, Llc located at 35457 Owens Rd, Prairie View TX 77446, United
Restrictions 5365-01-055-9692
5365-01-055-9692 is a Plate Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5365-01-055-9692
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-055-9692
- US Air Force (FXGG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- FXCX
- Poland (WP01)
- Effective Date:
- 1 Jan 2007
- Republic of Korea (ZH01)
- Effective Date:
- 1 Oct 2002
- Netherlands (ZN01)
- Effective Date:
- 1 Apr 1991
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 2008
- Turkey (ZW01)
- Effective Date:
- 1 Dec 1995
Approved Sources 5365-01-055-9692
- Part Number
- Manufacturer
- Status
- 35457
- Manufacturer
- 99643 - Eaton Aerospace Llc (Active)
- Primary Buy
- Primary Buy
Datasheet 5365-01-055-9692
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Aperture Diameter [ABVL]
- 1.062 Inches Minimum And 1.067 Inches Maximum
- Bolt Hole Quantity [AECS]
- 4
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 1.000 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Width [ADUY]
- 1.000 Inches Nominal
- Hole Diameter [AAUB]
- 0.182 Inches Minimum And 0.190 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-A-250/4,T62 Fed Spec Single Material Response
- Material [MATT]
- Aluminum Alloy 2024
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.164 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Width [ADVD]
- 0.164 Inches Nominal
- Overall Length [ABHP]
- 1.328 Inches Nominal
- Overall Width [ABMK]
- 1.328 Inches Nominal
- Style Designator [STYL]
- Non-Circular W/Bolt Holes
Weapon Systems (WSDC) 5365-01-055-9692
DLA Procurement Analysis 5365-01-055-9692
- Last Stock Position:
- 459 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-01-055-9692
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- QM
- PIPE, TUBING, HOSE & VALVES
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5365-01-055-9692
Freight Information 5365-01-055-9692
5365-01-055-9692 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of F. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI SUB6. 5365-01-055-9692 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. 5365-01-055-9692 is rated as class 100 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5365-01-055-9692 is not classified as a special type of cargo when transported by water. 5365-01-055-9692 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-055-9692
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 6.7" H x 6.7" W x 0.5" L
- --
- --
- --
- Any Suitable Process
- 6.7" H x 6.7" W x 0.5" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5365-01-055-9692 1 Records
Contracting Technical Data File (CTDF) 5365-01-055-9692 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: