Premium Information is available for this item - Upgrade for $1 a day
5365-01-052-2788
Shim
5365010522788 010522788 P189-5 5365PL0688466
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
November 2023
25
Marketplace 5365-01-052-2788
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-052-2788 5+ Documents (More...)
Shim 5365010522788 010522788,P189-5 5365-01-052-2788 5365010522788 010522788 is a thin flat metal
Shim 5365010522788 010522788,P189-5 5365-01-052-2788 5365010522788 010522788 is a thin flat metal
Shim 5365010522788 010522788,P189-5 P189-5 SHIM 27 EA NS Request Quotation P189-3 SHIM 60 EA NS
Restrictions 5365-01-052-2788
5365-01-052-2788 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-052-2788
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-052-2788
- US Air Force (FUGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FUCX
- US Navy (N9BG)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GGGT
- Poland (WP01)
- Effective Date:
- 1 Jan 2007
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Belgium (ZB01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Netherlands (ZN01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Dec 2007
- Denmark (ZS01)
- Effective Date:
- 1 May 2002
- Norway (ZT01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 2008
- Turkey (ZW01)
- Effective Date:
- 1 Dec 1995
Approved Sources 5365-01-052-2788
- Part Number
- Manufacturer
- Status
- P189-5
- Manufacturer
- 81755 - Lockheed Martin Corporation (Active)
- Primary Buy
- Primary Buy
- 5365PL0688466
- 9009H - Jednolity Indeks Materialowy - (Active)
- NATO Reference
- NATO Reference
Datasheet 5365-01-052-2788
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Aperture Diameter [ABVL]
- 0.545 Inches Minimum And 0.555 Inches Maximum
- Bolt Hole Quantity [AECS]
- 2
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 0.867 Inches Minimum And 0.883 Inches Maximum
- Construction [CQCF]
- One-Piece
- Hole Diameter [AAUB]
- 0.128 Inches Minimum And 0.138 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-A-250/5,Alloy 2024,T3 Fed Spec Single Material Response
- Material [MATT]
- Aluminum Alloy
- Outside Corner Bevel Length Along Length [ADUQ]
- 0.510 Inches Minimum And 0.530 Inches Maximum
- Outside Corner Bevel Length Along Width [ADUP]
- 0.315 Inches Minimum And 0.335 Inches Maximum
- Overall Length [ABHP]
- 1.185 Inches Minimum And 1.205 Inches Maximum
- Overall Width [ABMK]
- 0.635 Inches Minimum And 0.665 Inches Maximum
- Style Designator [STYL]
- Non-Circular W/Bolt Holes
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625,Type 1 Mil Spec Single Treatment Response
- Surface Treatment [SFTT]
- Anodize
Weapon Systems (WSDC) 5365-01-052-2788
DLA Procurement Analysis 5365-01-052-2788
- Last Stock Position:
- 2044 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-01-052-2788
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- WF
- F-16 AIR COMBAT FIGHTER
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5365-01-052-2788
Freight Information 5365-01-052-2788
5365-01-052-2788 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 106940. A Sub NMFC of X. It has a NMFC Description of SPACERS/SEPARATORS I/S NOI TUBULAR. 5365-01-052-2788 is rated as class 55 when transported by Less-Than Truckload (LTL) freight. 5365-01-052-2788 is rated as class 55 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 50675 which rates the freight between FCL and LCL. 5365-01-052-2788 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-052-2788 is not classified as a special type of cargo when transported by water. 5365-01-052-2788 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-052-2788
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 5365-01-052-2788 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: