Premium Information is available for this item - Upgrade for $1 a day
5365-01-028-8043
Shim
5365010288043 010288043 710-1322-7
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
May 2023
4
Marketplace 5365-01-028-8043
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-028-8043 1+ Documents (More...)
Updated Every Day 5365-01-028-8043 RQST NE Related Documents 5365-01-028-8043 1+ Documents ( More...
) https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-028-8043 Shim 5365010288043 010288043,710-1322
Restrictions 5365-01-028-8043
5365-01-028-8043 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-028-8043
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-028-8043
- US Air Force (FGGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FGCX
Approved Sources 5365-01-028-8043
- Part Number
- Manufacturer
- Status
- 710-1322-7
- Manufacturer
- 0RCH2 - Warner Robins Air Logistics Center (Active)
- Primary Buy
- Primary Buy
- 710-1322-7
- 16735 - Corning Oca Corp (Obsolete)
- Original Design
- Original Design
Datasheet 5365-01-028-8043
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Aperture Diameter [ABVL]
- 1.200 Inches Nominal
- Construction [CQCF]
- One-Piece
- Material Document And Classification [MDCL]
- Qq-B-613,1/2 H Fed Spec Single Material Response
- Material [MATT]
- Copper And Zinc
- Outside Diameter [ABKV]
- 1.398 Inches Nominal
- Style Designator [STYL]
- Circular
- Surface Treatment Document And Classification [STDC]
- Mil-C-13924,Class 2 Mil Spec Single Treatment Response
- Surface Treatment [SFTT]
- Oxide Film
Weapon Systems (WSDC) 5365-01-028-8043
DLA Procurement Analysis 5365-01-028-8043
Management Data 5365-01-028-8043
Similar Supply Items to 5365-01-028-8043
Freight Information 5365-01-028-8043
5365-01-028-8043 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5365-01-028-8043 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5365-01-028-8043 is rated as a variable freight class when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 596 for ocean manifesting and military sealift. 5365-01-028-8043 is not classified as a special type of cargo when transported by water. 5365-01-028-8043 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-028-8043
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 5365-01-028-8043 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: