Premium Information is available for this item - Upgrade for $1 a day
5365-00-948-7152
Plate Spacer
5365009487152 009487152 467483
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. View more Plate Spacer
May 2023
23
Marketplace 5365-00-948-7152
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-948-7152 5+ Documents (More...)
Plate Spacer 5365009487152 009487152,467483 Upgrade for $1 a day Upgrade your Account Upgrade 5365
-00-948-7152Plate Spacer5365009487152 009487152 467483 Request a Quotation from participating marketplace
Restrictions 5365-00-948-7152
5365-00-948-7152 is a Plate Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5365-00-948-7152
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-00-948-7152
- US Navy (N9BG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTKE
- Brazil (YA01)
- Effective Date:
- 1 Mar 2007
- Israel (YD01)
- Effective Date:
- 1 Apr 1991
- Kuwait (YK01)
- Effective Date:
- 1 Jan 2015
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5365-00-948-7152
- Part Number
- Manufacturer
- Status
- 467483
- Manufacturer
- 77445 - Rtx Corporation (Active)
- Primary Buy
- Primary Buy
- 467483
- 52661 - Rtx Corporation (Active)
- Secondary Buy
- Secondary Buy
- 467483
- S0554 - Tokyo Judogi Kogyo Co. (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 467483
- 34830 - Rogerson Kratos (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 467483
- 98003 - Nielsen Hardware Corp (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5365-00-948-7152
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- End Item Identification [AGAV]
- Jet Engine, Acft
- Bolt Hole Quantity [AECS]
- 2
- Bolt Hole Centerline To Nearest Edge Distance [ADVJ]
- 0.218 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 0.750 Inches Nominal
- Hole Diameter [AAUB]
- 0.214 Inches Minimum And 0.224 Inches Maximum
- Material [MATT]
- Steel Comp 410
- Outside Corner Radius [ADPW]
- 0.344 Inches Minimum And 0.406 Inches Maximum
- Material Document And Classification [MDCL]
- Ams 5504 Assn Std Single Material Response
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.218 Inches Nominal
- Overall Length [ABHP]
- 1.186 Inches Nominal
- Overall Width [ABMK]
- 0.422 Inches Minimum And 0.453 Inches Maximum
- Style Designator [STYL]
- Non-Circular W/Corner Radius
- Surface Treatment [SFTT]
- Passivate
Weapon Systems (WSDC) 5365-00-948-7152
DLA Procurement Analysis 5365-00-948-7152
Management Data 5365-00-948-7152
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5365-00-948-7152
Freight Information 5365-00-948-7152
5365-00-948-7152 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5365-00-948-7152 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5365-00-948-7152 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-00-948-7152 is not classified as a special type of cargo when transported by water. 5365-00-948-7152 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-00-948-7152
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5365-00-948-7152 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: