Premium Information is available for this item - Upgrade for $1 a day
5365-00-935-8895
Plate Spacer
5365009358895 009358895 2-161-108-02
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. View more Plate Spacer
September 2023
15
Marketplace 5365-00-935-8895
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-935-8895 1+ Documents (More...)
Restrictions 5365-00-935-8895
5365-00-935-8895 is a Plate Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5365-00-935-8895
- US Army (A919)
- Effective Date:
- 1 May 2005
- Supplementary Receivers:
- CT
- US Navy (N9BG)
- Effective Date:
- 1 May 2005
- Spain (YB)
- Spain (YB01)
- Effective Date:
- 1 Feb 1994
- Singapore (YJ)
- Singapore (YJ01)
- Effective Date:
- 1 May 1996
- Malaysia (YW)
- Malaysia (YW01)
- Effective Date:
- 1 Apr 1991
- Australia (ZA)
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC)
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH)
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- United Kingdom (ZK)
- United Kingdom (ZK01)
- Effective Date:
- 1 Apr 1991
- Netherlands (ZN)
- Netherlands (ZN01)
- Effective Date:
- 1 Feb 1995
- Greece (ZU)
- Greece (ZU01)
- Effective Date:
- 1 Aug 1995
- United States of America (ZZ)
Approved Sources 5365-00-935-8895
- Part Number
- Manufacturer
- Status
- 2-161-108-02
- Manufacturer
- 99193 - Honeywell International Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 5365-00-935-8895
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Bolt Hole Quantity [AECS]
- 2
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 1.490 Inches Minimum And 1.510 Inches Maximum
- Hardness Rating [CQFM]
- 37.0 Rockwell C Minimum And 44.0 Rockwell C Maximum
- Hole Diameter [AAUB]
- 0.210 Inches Minimum And 0.230 Inches Maximum
- Outside Corner Radius [ADPW]
- 0.270 Inches Minimum And 0.390 Inches Maximum
- Overall Length [ABHP]
- 1.910 Inches Minimum And 1.970 Inches Maximum
- Overall Width [ABMK]
- 0.430 Inches Minimum And 0.450 Inches Maximum
Weapon Systems (WSDC) 5365-00-935-8895
DLA Procurement Analysis 5365-00-935-8895
Management Data 5365-00-935-8895
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5365-00-935-8895
Freight Information 5365-00-935-8895
5365-00-935-8895 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5365-00-935-8895 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. 5365-00-935-8895 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5365-00-935-8895 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-00-935-8895 is not classified as a special type of cargo when transported by water. 5365-00-935-8895 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5365-00-935-8895 3 Records
Contracting Technical Data File (CTDF) 5365-00-935-8895 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: