Premium Information is available for this item - Upgrade for $1 a day
5365-00-934-1613
Plate Spacer
5365009341613 009341613 56122-85239-3 S6122-85239-3
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. View more Plate Spacer
May 2023
4
Marketplace 5365-00-934-1613
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-934-1613 4+ Documents (More...)
S6122-85239-3 SPACER 9 EA NS Request Quotation Updated Every Day 5365-00-934-1613 RQST NE Updated Every
Day 5365-00-934-1613 RQST Updated Every Day 5365-00-934-1613 RQST NE Related Documents 5365-00-934-1613
Plate Spacer 5365009341613 009341613 for $1 a day Upgrade your Account Upgrade 5365-00-934-1613Plate
Spacer5365009341613 009341613 56122-85239 -3 S6122-85239-3 A flat metal or plastic item of various peripheral
Plate Spacer 5365009341613 009341613 for $1 a day Upgrade your Account Upgrade 5365-00-934-1613Plate
Spacer5365009341613 009341613 56122-85239 S6122-85239-003 SPACER,PLATE 5 EA NS Request Quotation Subscribe
Plate Spacer 5365009341613 009341613 for $1 a day Upgrade your Account Upgrade 5365-00-934-1613Plate
Spacer5365009341613 009341613 56122-85239 S6122-85239-003 SPACER,PLATE 5 EA NS Request Quotation Subscribe
Restrictions 5365-00-934-1613
5365-00-934-1613 is a Plate Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-00-934-1613
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-00-934-1613
- US Coast Guard (C911)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- C006
- US Air Force (FXGG)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- FXCX
- US Navy (N9BG)
- Effective Date:
- 1 Sep 2004
- Italy (ZR01)
- Effective Date:
- 1 Dec 2007
Approved Sources 5365-00-934-1613
- Part Number
- Manufacturer
- Status
- 56122-85239-3
- Manufacturer
- 54878 - Rotair Aerospace Corp (Active)
- Primary Buy
- Primary Buy
- S6122-85239-3
- 78286 - Sikorsky Aircraft Corporation (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5365-00-934-1613
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Aperture Diameter [ABVL]
- 1.880 Inches Nominal
- Bolt Hole Quantity [AECS]
- 4
- Center To Center Distance Between Bolt Holes Along Width [ADUY]
- 1.625 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 2.000 Inches Nominal
- Hole Diameter [AAUB]
- 0.312 Inches Nominal
- Material Document And Classification [MDCL]
- Qq-A-250/5,T3 Fed Spec Single Material Response
- Material [MATT]
- Aluminum Alloy 2024
- Outside Corner Bevel Length Along Length [ADUQ]
- 0.200 Inches Nominal
- Outside Corner Bevel Length Along Width [ADUP]
- 0.200 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Width [ADVD]
- 0.375 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.3875 Inches Nominal
- Overall Length [ABHP]
- 2.750 Inches Nominal
- Overall Width [ABMK]
- 2.400 Inches Nominal
- Style Designator [STYL]
- Non-Circular W/Bolt Holes
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625 Mil Spec Single Treatment Response And Tt-P-1757 Fed Spec 2Nd Treatment Response
- Surface Treatment [SFTT]
- Anodize And Paint
DLA Procurement Analysis 5365-00-934-1613
Management Data 5365-00-934-1613
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5365-00-934-1613
Freight Information 5365-00-934-1613
5365-00-934-1613 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5365-00-934-1613 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5365-00-934-1613 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-00-934-1613 is not classified as a special type of cargo when transported by water. 5365-00-934-1613 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-00-934-1613
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5365-00-934-1613 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: