Premium Information is available for this item - Upgrade for $1 a day
5365-00-923-2510
Shim
5365009232510 009232510 MIL-S-22499 414589-1
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
May 2023
4
Marketplace 5365-00-923-2510
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-923-2510 5+ Documents (More...)
MIL-S-22499 SHIM 17 EA NS Request Quotation Subscribe to View Vendor Details... 414589-1 SHIM 3 EA NS
MIL-S-22499 SHIM 3 EA NS Request Quotation Updated Every Day 5365-00-923-2510 RQST NE Updated Every Day
SHIM 17 EA NS Request Quotation Subscribe to View Vendor Details... 414589-1 SHIM 3 EA NS 414589
Shim 5365009232510 009232510,MIL-S-22499 for $1 a day Upgrade your Account Upgrade 5365-00-923-
-00-923-2510Shim5365009232510 009232510 MIL-S-22499 MIL-S-22499 SHIM 17 EA NS Request Quotation Subscribe
to View Vendor Details... 414589-1 SHIM 3 EA NS MIL-S-22499 SHIM 5 EA NS Request Quotation Subscribe
browser . 5330-14-478-2431Nonmetallic Special Shaped Section Seal5330144782431 144782431 810105C 414589 $1
Shim 5365009232510 009232510,MIL-S-22499 for $1 a day Upgrade your Account Upgrade 5365-00-923-
Shim 5365009232510 009232510,MIL-S-22499 for $1 a day Upgrade your Account Upgrade 5365-00-923-
2510Shim5365009232510 009232510 MIL-S-22499 414589 MIL-S-22499 SHIM 17 EA NS Request Quotation Subscribe
Restrictions 5365-00-923-2510
5365-00-923-2510 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-00-923-2510
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-00-923-2510
- US Navy (N9BG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTKEHD
- Brazil (YA01)
- Effective Date:
- 1 Oct 2000
- France (ZF01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5365-00-923-2510
- Part Number
- Manufacturer
- Status
- 414589-1
- Manufacturer
- 80020 - Naval Air Warfare Center Aircraft (Active)
- Primary Buy
- Primary Buy
- MIL-S-22499
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 5365-00-923-2510
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Bolt Hole Quantity [AECS]
- 2
- Bolt Hole Centerline To Nearest Edge Distance [ADVJ]
- 2.500 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 16.234 Inches Minimum And 16.265 Inches Maximum
- Construction [CQCF]
- Laminated
- Features Provided [CBBL]
- Separable
- Hole Diameter [AAUB]
- 1.375 Inches Nominal
- Material Document And Classification [MDCL]
- Qq-B-613,Composition 2,1/4 Hard Fed Spec Single Material Response
- Material [MATT]
- Copper Alloy 260
- Nondefinitive Spec/Std Data [ZZZT]
- 2 Type And 2 Class And 2 Composition
- Lamination Quantity [BRDX]
- 21 And 1
- Lamination Thickness [BRDY]
- 0.003 Inches Nominal And 0.062 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 1.625 Inches Nominal
- Overall Length [ABHP]
- 19.437 Inches Minimum And 19.562 Inches Maximum
- Overall Width [ABMK]
- 5.000 Inches Nominal
- Specification/Standard Data [ZZZK]
- 81349-Mil-S-22499 Government Specification
- Style Designator [STYL]
- Non-Circular W/Square Corners
Weapon Systems (WSDC) 5365-00-923-2510
DLA Procurement Analysis 5365-00-923-2510
Management Data 5365-00-923-2510
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5365-00-923-2510
Freight Information 5365-00-923-2510
5365-00-923-2510 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 115620. A Sub NMFC of X. It has a NMFC Description of BUSHINGS NOI I/S. 5365-00-923-2510 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 59240 which rates the freight between FCL and LCL. 5365-00-923-2510 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-00-923-2510 is not classified as a special type of cargo when transported by water. 5365-00-923-2510 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-00-923-2510
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5365-00-923-2510 1 Records
Contracting Technical Data File (CTDF) 5365-00-923-2510 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: