Premium Information is available for this item - Upgrade for $1 a day
5365-00-894-8022
Shim
5365008948022 008948022 50007A
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
November 2023
4
Marketplace 5365-00-894-8022
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-894-8022 5+ Documents (More...)
Restrictions 5365-00-894-8022
5365-00-894-8022 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Approved Sources 5365-00-894-8022
- Part Number
- Manufacturer
- Status
- 50007A
- Manufacturer
- 73760 - Itt Aerospace Controls Llc (Active)
- Primary Buy
- Primary Buy
Management Data 5365-00-894-8022
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- May 2004
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Apr 2004
- Department of the Navy (DN)
- EA
- Subscribe
- 1
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Air Force (DF)
- F
- V
- Discontinued Without Replacement
- V
- Department of the Air Force (DF)
- I
- V
- Discontinued Without Replacement
- V
- Department of the Navy (DN)
- N
- V
- Discontinued Without Replacement
- V
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 8
- 97X4830.FCL4 - Materiel Support DIV (MSD) - Materiel Support Division (MSD), which includes those Air Force Centrally Managed Investment Items (ERRC XD1=C and XD2=T) except for those still managed in budget programs (BP) 15, 25, 82, 83, and 84 as stock fund exempt. MSD also includes items centrally procured and managed as Expense Items (ERRC XB3=N and XF3=P). Reference AFMAN 23–110, Volume 1, Part 3, Chapter 7, Paragraph 7.3.1
- Aggregation Code:
- GG
- GUNNERY EQUIPMENT
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9F