Premium Information is available for this item - Upgrade for $1 a day
5365-00-883-5008
Ring Spacer
5365008835008 008835008 6863817 EU53568
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE. View more Ring Spacer
May 2023
4
Marketplace 5365-00-883-5008
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-883-5008 1+ Documents (More...)
Restrictions 5365-00-883-5008
5365-00-883-5008 is a Ring Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5365-00-883-5008
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-00-883-5008
- US Air Force (FXGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FXCX
Approved Sources 5365-00-883-5008
- Part Number
- Manufacturer
- Status
- 6863817
- Manufacturer
- 73342 - Allison Transmission Inc (Active)
- Primary Buy
- Primary Buy
- 6863817
- K0680 - Rolls-Royce Airlines (Active)
- Secondary Buy
- Secondary Buy
- EU53568
- K0680 - Rolls-Royce Airlines (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5365-00-883-5008
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Fsc Application Data [ZZZV]
- 1. Engine,Acft,Turbo Fan Bypass
- Material [MATT]
- Steel Comp 420
- Outside Diameter [ABHE]
- 7.060 Inches Minimum And 7.090 Inches Maximum
- Inside Diameter [AARX]
- 6.780 Inches Minimum And 6.783 Inches Maximum
- Material Document And Classification [MDCL]
- Ams 5621 Assn Std Single Material Response
- Overall Thickness [ADUM]
- 0.224 Inches Minimum And 0.225 Inches Maximum
- Surface Finish [CSYM]
- 63.0 Microinches Bore
- Surface Finish [CSYM]
- 63.0 Microinches Largest Outside Diameter
- Surface Finish [CSYM]
- 63.0 Microinches Left Side
- Surface Finish [CSYM]
- 63.0 Microinches Right Side
DLA Procurement Analysis 5365-00-883-5008
Management Data 5365-00-883-5008
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- CN
- TF-41 ENGINE
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5365-00-883-5008
Freight Information 5365-00-883-5008
5365-00-883-5008 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 133300. A Sub NMFC of Z. It has a NMFC Description of MACHINERY/MACHINES NOI. 5365-00-883-5008 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5365-00-883-5008 is rated as class 85 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 63220 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-00-883-5008 is not classified as a special type of cargo when transported by water. 5365-00-883-5008 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5365-00-883-5008 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: