Premium Information is available for this item - Upgrade for $1 a day
5365-00-768-1020
Plate Spacer
5365007681020 007681020 2-40138-3
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. View more Plate Spacer
July 2023
8
Marketplace 5365-00-768-1020
Request a Quotation from participating marketplace vendors
Restrictions 5365-00-768-1020
5365-00-768-1020 is a Plate Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5365-00-768-1020
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-00-768-1020
- US Air Force (FUGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FUCX
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5365-00-768-1020
- Part Number
- Manufacturer
- Status
- 2-40138-3
- Manufacturer
- 76823 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
- 2-40138-3
- 8X044 - Derco Aerospace, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 2-40138-3
- 0JRC1 - Northrop Grumman Technical Services, (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5365-00-768-1020
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Material [MATT]
- Magnesium Alloy
- Material Document And Classification [MDCL]
- Qq-M-44,Cond H Fed Spec Single Material Response
- Bolt Hole Quantity [AECS]
- 2
- Style Designator [STYL]
- Non-Circular W/Square Corners
- Hole Diameter [AAUB]
- 0.250 Inches Nominal
- Overall Length [ABHP]
- 3.370 Inches Nominal
- Overall Width [ABMK]
- 0.750 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 2.625 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.372 Inches Nominal
- Bolt Hole Centerline To Nearest Edge Distance [ADVJ]
- 0.375 Inches Nominal
Weapon Systems (WSDC) 5365-00-768-1020
DLA Procurement Analysis 5365-00-768-1020
Management Data 5365-00-768-1020
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Mar 2022
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Aug 2021
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- XE
- T-38 TALON
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5365-00-768-1020
Freight Information 5365-00-768-1020
5365-00-768-1020 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of E. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI SUB5. 5365-00-768-1020 is rated as class 125 when transported by Less-Than Truckload (LTL) freight. 5365-00-768-1020 is rated as class 100 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-00-768-1020 is not classified as a special type of cargo when transported by water. 5365-00-768-1020 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-00-768-1020
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5365-00-768-1020 9 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A723P6177
- 19 Feb 2023
- Subscribe
- 240
- Subscribe
- Subscribe
- Subscribe
- SPE4A722P7552
- 24 Mar 2022
- Subscribe
- 82
- Subscribe
- Subscribe
- Subscribe
- SPE4A721PB698P00001
- 13 Jul 2021
- Subscribe
- 80
- Subscribe
- Subscribe
- Subscribe
- SPE4A721PB698P00002
- 13 Jul 2021
- Subscribe
- 80
- Subscribe
- Subscribe
- Subscribe
- SPE4A721PB664P00001
- 12 Jul 2021
- Subscribe
- 113
- Subscribe
- Subscribe
- Subscribe
- SPE4A721PB664P00002
- 12 Jul 2021
- Subscribe
- 113
- Subscribe
- Subscribe
- Subscribe
- SPE4A617P9768
- 14 Mar 2017
- Subscribe
- 443
- Subscribe
- Subscribe
- Subscribe
- SPE4A615M8855
- 14 Apr 2015
- Subscribe
- 309
- Subscribe
- Subscribe
- Subscribe
- SPE4A614M8879
- 20 Feb 2014
- Subscribe
- 221
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5365-00-768-1020 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: