Premium Information is available for this item - Upgrade for $1 a day
5365-00-715-5327
Shim
5365007155327 007155327 QF81A 1DQF81A 41100E6 CFR40071 JHP36-231
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
January 2023
12
Marketplace 5365-00-715-5327
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-715-5327 5+ Documents (More...)
Restrictions 5365-00-715-5327
5365-00-715-5327 is a Shim Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5365-00-715-5327
- Austria (WB01)
- Effective Date:
- 1 Feb 2005
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5365-00-715-5327
- Part Number
- Manufacturer
- Status
- QF81A
- Manufacturer
- 66289 - Wisconsin Motors Llc (Active)
- Primary Buy
- Primary Buy
- 1DQF81A
- 23382 - Fwd Seagrave Holdings Lp (Active)
- Secondary Buy
- Secondary Buy
- 41100E6
- 70142 - Aeroil Products Co Inc (Active)
- Secondary Buy
- Secondary Buy
- CFR40071
- 82254 - Curtis Dyna-Fog, Ltd. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- JHP36-231
- 02032 - Hollingsworth John R Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
NATO Stock Numbers Related to 5365-00-715-5327
Freight Information 5365-00-715-5327
5365-00-715-5327 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5365-00-715-5327 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5365-00-715-5327 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 596 for ocean manifesting and military sealift. 5365-00-715-5327 is not classified as a special type of cargo when transported by water. 5365-00-715-5327 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.