Premium Information is available for this item - Upgrade for $1 a day
5365-00-558-8603
Shim
5365005588603 005588603 1226585-3
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
November 2023
14
Marketplace 5365-00-558-8603
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-558-8603 4+ Documents (More...)
671 EA NS Request Quotation Subscribe to View Vendor Details... 1226585-3 MARKER,IDENTIFICATION 85 EA
NS Request Quotation Subscribe to View Vendor Details... 1226585-3 MARKER,IDENTIFICATION 90 EA NS Request
Restrictions 5365-00-558-8603
5365-00-558-8603 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5365-00-558-8603
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-00-558-8603
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5365-00-558-8603
- Part Number
- Manufacturer
- Status
- 1226585-3
- Manufacturer
- 96774 - Honeywell International Inc. (Active)
- Primary Buy
- Primary Buy
- 1226585-3
- 55972 - Honeywell Intl Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5365-00-558-8603
- Characteristic
- Specifications
- Aperture Diameter [ABVL]
- Specifications
- 0.157 Inches Nominal
- Construction [CQCF]
- One-Piece
- Hardness Rating [CQFM]
- 25.0 Rockwell C Nominal
- Material Document And Classification [MDCL]
- Mil-S-5059,Cond Hard Mil Spec Single Material Response
- Material [MATT]
- Steel
- Outside Diameter [ABKV]
- 0.240 Inches Nominal
- Surface Treatment [SFTT]
- Passivate
NATO Stock Numbers Related to 5365-00-558-8603
Freight Information 5365-00-558-8603
5365-00-558-8603 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5365-00-558-8603 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5365-00-558-8603 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-00-558-8603 is not classified as a special type of cargo when transported by water. 5365-00-558-8603 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.