Premium Information is available for this item - Upgrade for $1 a day
5365-00-460-2615
Shim
5365004602615 004602615 1098A 1098 DGC765PC45 ER63874A
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
May 2023
28
Marketplace 5365-00-460-2615
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-460-2615 5+ Documents (More...)
IL 4. 1098A Esco Engineering Supplies Ltd is an Active Commercial Supplier with the Cage Code 1098A.
What is CAGE Code 1098A?
IL 4. 1098A Esco Engineering Supplies Ltd is an Active Commercial Supplier with the Cage Code 1098A.
What is CAGE Code 1098A?
Restrictions 5365-00-460-2615
5365-00-460-2615 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-00-460-2615
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-00-460-2615
- NASA (G760)
- Effective Date:
- 1 Apr 1991
- US Navy (N9BG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- HD
- Brazil (YA01)
- Effective Date:
- 1 Dec 2001
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Thailand (YY01)
- Effective Date:
- 1 Feb 2015
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Netherlands (ZN01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Jul 2005
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 5365-00-460-2615
- Part Number
- Manufacturer
- Status
- 1098
- Manufacturer
- 59431 - Tecumseh Products Company Llc (Obsolete)
- Original Design
- Original Design
- 1098A
- 58445 - Sunroc Corp (Active)
- Secondary Buy
- Secondary Buy
- 1098A
- 59431 - Tecumseh Products Company Llc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- DGC765PC45
- 59431 - Tecumseh Products Company Llc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- ER63874A
- 59431 - Tecumseh Products Company Llc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- ER63874A
- 92435 - Alco Standard Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5365-00-460-2615
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Material [MATT]
- Steel
- Construction [CQCF]
- One-Piece
- Bolt Hole Quantity [AECS]
- 2
- Style Designator [STYL]
- Non-Circular W/Square Corners
- Hole Diameter [AAUB]
- 0.218 Inches Nominal
- Overall Length [ABHP]
- 1.500 Inches Nominal
- Overall Width [ABMK]
- 0.625 Inches Nominal
- Outside Corner Bevel Length Along Width [ADUP]
- 0.250 Inches Nominal
- Outside Corner Bevel Length Along Length [ADUQ]
- 0.250 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 1.000 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.250 Inches Nominal
- Bolt Hole Centerline To Nearest Edge Distance [ADVJ]
- 0.313 Inches Nominal
DLA Procurement Analysis 5365-00-460-2615
Management Data 5365-00-460-2615
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5365-00-460-2615
Freight Information 5365-00-460-2615
5365-00-460-2615 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 053025. A Sub NMFC of Z. It has a NMFC Description of COOLERS,ICEBOXES,REFRIGERATORS. 5365-00-460-2615 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 30658 which rates the freight between FCL and LCL. 5365-00-460-2615 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 725 for ocean manifesting and military sealift. 5365-00-460-2615 is not classified as a special type of cargo when transported by water. 5365-00-460-2615 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-00-460-2615
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5365-00-460-2615 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- R
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: