Premium Information is available for this item - Upgrade for $1 a day
5365-00-450-4409
Shim
5365004504409 004504409 252620
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
November 2023
4
Marketplace 5365-00-450-4409
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-450-4409 5+ Documents (More...)
Request a Quotation from participating marketplace vendors Request International Tool 252620 Milwaukee
RNVC 9 DAC 5 DMS 87041B 16236 - Dla Land And Maritime (Active) Canceled/Obsolete RNCC 5 RNVC 9 DAC 9 252620
Restrictions 5365-00-450-4409
5365-00-450-4409 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5365-00-450-4409
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-00-450-4409
- US Air Force (FXGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FXCX
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5365-00-450-4409
- Part Number
- Manufacturer
- Status
- 252620
- Manufacturer
- 78062 - Sargent Aerospace & Defense, Llc (Active)
- Primary Buy
- Primary Buy
- 252620
- 0KDP7 - Kidde-Fenwal, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5365-00-450-4409
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Aperture Diameter [ABVL]
- 2.580 Inches Nominal
- Construction [CQCF]
- Laminated
- Features Provided [CBBL]
- Separable
- Material [MATT]
- Steel
- Outside Diameter [ABKV]
- 2.800 Inches Nominal
- Lamination Quantity [BRDX]
- 60
- Lamination Thickness [BRDY]
- 0.002 Inches Nominal
- Style Designator [STYL]
- Circular
Weapon Systems (WSDC) 5365-00-450-4409
DLA Procurement Analysis 5365-00-450-4409
- Last Stock Position:
- 69 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-00-450-4409
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5365-00-450-4409
Freight Information 5365-00-450-4409
5365-00-450-4409 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114850. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING O/T BALL/ROLLER I/S. 5365-00-450-4409 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58880 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-00-450-4409 is not classified as a special type of cargo when transported by water. 5365-00-450-4409 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5365-00-450-4409 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A618V0399
- 06 Oct 2017
- Subscribe
- 76
- Subscribe
- Subscribe
- Subscribe
- SPEHA617P0326
- 11 Aug 2017
- Subscribe
- 37
- Subscribe
- Subscribe
- Subscribe
- SPEHA617P0329P00001
- 11 Aug 2017
- Subscribe
- 8
- Subscribe
- Subscribe
- Subscribe
- SPEHA617P0324
- 10 Aug 2017
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPEHA617P0322
- 09 Aug 2017
- Subscribe
- 18
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5365-00-450-4409 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: