Premium Information is available for this item - Upgrade for $1 a day
5365-00-371-3129
Shim
5365003713129 003713129 7412378 6332C2 5250E9169 303512 305297 10105A 033033 6331 09-6332C2 4723714 4724020 4316W RT9548 190268 09-6331
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
November 2023
32
Marketplace 5365-00-371-3129
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-371-3129 5+ Documents (More...)
Restrictions 5365-00-371-3129
5365-00-371-3129 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-00-371-3129
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-00-371-3129
- US Army (A919)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- A180
- Supplementary Receivers:
- AZBD
- US Air Force (FXGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FXCX
- US Marine Corps (MC41)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- MC04
- US Navy (N9BG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- N9GD
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5365-00-371-3129
- Part Number
- Manufacturer
- Status
- 7412378
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
- 303512
- 62265 - Volvo Trucks North America, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 6332C2
- 78640 - Mitsubishi Caterpillar Forklift (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 5250E9169
- 83299 - Hyster-Yale Group, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 303512
- 65282 - White Motor Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 305297
- 78640 - Mitsubishi Caterpillar Forklift (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 10105A
- 44185 - Wollard International Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 5250E9169
- 66821 - Yale Security Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 033033
- 77640 - Zf Active Safety And Electronics Us (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 6331
- 78640 - Mitsubishi Caterpillar Forklift (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 09-6332C2
- 16662 - Lift Parts Mfg Co Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 4723714
- 0AHU0 - Kalmar Ac Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4724020
- 0AHU0 - Kalmar Ac Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4316W
- 56442 - Diamond Reo Truck Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- RT9548
- 81240 - White Farm Equipment Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 190268
- 58275 - Sasco Inc Canadian Div (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 09-6331
- 16662 - Lift Parts Mfg Co Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5365-00-371-3129
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Aperture Diameter [ABVL]
- 2.078 Inches Nominal
- Bolt Hole Quantity [AECS]
- 4
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 2.000 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Width [ADUY]
- 1.750 Inches Nominal
- Construction [CQCF]
- One-Piece
- Fsc Application Data [ZZZV]
- Steering Gear Assembly,Wheel Tupe Tractor
- Hole Diameter [AAUB]
- 0.328 Inches Nominal
- Material [MATT]
- Steel
- Outside Corner Radius [ADPW]
- 0.313 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.313 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Width [ADVD]
- 0.313 Inches Nominal
- Overall Length [ABHP]
- 2.625 Inches Nominal
- Overall Width [ABMK]
- 2.563 Inches Nominal
- Style Designator [STYL]
- Non-Circular W/Bolt Holes
DLA Procurement Analysis 5365-00-371-3129
Management Data 5365-00-371-3129
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Material Identification:
- B
- Consumable Repair Parts
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5365-00-371-3129
Freight Information 5365-00-371-3129
5365-00-371-3129 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 133300. A Sub NMFC of Z. It has a NMFC Description of MACHINERY/MACHINES NOI. 5365-00-371-3129 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 63220 which rates the freight between FCL and LCL. 5365-00-371-3129 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-00-371-3129 is not classified as a special type of cargo when transported by water. 5365-00-371-3129 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-00-371-3129
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5365-00-371-3129 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: