Premium Information is available for this item - Upgrade for $1 a day
5365-00-308-3441
Serrated Lock Ring
5365003083441 003083441 RL56SA11 11699944-1
A locking device which is serrated on the inside and outside diameters. It may have outer serrations omitted on one or two sides for close edge installation. The inner serrations engage the mating serrations of bolts, inserts, nuts, studs or similar items to be locked in place. The outer serrations broach their way into parent material when driven or pressed into place. View more Serrated Lock Ring
May 2023
5
Marketplace 5365-00-308-3441
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-308-3441 3+ Documents (More...)
Restrictions 5365-00-308-3441
5365-00-308-3441 is a Serrated Lock Ring that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5365-00-308-3441
- US Air Force (FGGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FGCX
Approved Sources 5365-00-308-3441
- Part Number
- Manufacturer
- Status
- RL56SA11
- Manufacturer
- 83324 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- 11699944-1
- 19205 - Springfield Armory (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5365-00-308-3441
- Characteristic
- Specifications
- FIIG
- Specifications
- T252-E
- Material [MATT]
- Steel Comp 4130
- Inside Diameter [AARX]
- 0.690 Inches Minimum And 0.700 Inches Maximum
- Overall Height [ABKW]
- 0.171 Inches Minimum And 0.181 Inches Maximum
- Overall Outside Diameter [ADGA]
- 0.905 Inches Minimum And 0.915 Inches Maximum
- Pilot Diameter [AAVL]
- 0.833 Inches Minimum And 0.843 Inches Maximum
- Surface Treatment [SFTT]
- Cadmium And Chromate
DLA Procurement Analysis 5365-00-308-3441
Management Data 5365-00-308-3441
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- GG
- GUNNERY EQUIPMENT
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5365-00-308-3441
Freight Information 5365-00-308-3441
5365-00-308-3441 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5365-00-308-3441 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5365-00-308-3441 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-00-308-3441 is not classified as a special type of cargo when transported by water. 5365-00-308-3441 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5365-00-308-3441 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: