Premium Information is available for this item - Upgrade for $1 a day
5365-00-126-4074
Shim
5365001264074 001264074 32721-1 101584-2 5365-OH58-001
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
November 2023
29
Marketplace 5365-00-126-4074
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-126-4074 5+ Documents (More...)
COMPANION,NONVEHICULAR UNIVERSAL JOINT 1 EA NS Request Quotation Subscribe to View Vendor Details... 32721-1
COMPANION,NONVEHICULAR UNIVERSAL JOINT 26 EA NS Request Quotation Subscribe to View Vendor Details... 32721-1
Restrictions 5365-00-126-4074
IUID Required
5365-00-126-4074 is a Shim that is an aviation critical safety item or flight safety critical aircraft part. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-00-126-4074
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-00-126-4074
- US Army (A703)
- Effective Date:
- 6 Sep 2005
- US Army (A919)
- Effective Date:
- 1 Jun 2015
- Supplementary Receivers:
- CT
- US Air Force (FGCT)
- Effective Date:
- 6 Jan 2006
- US Air Force (FGGG)
- Effective Date:
- 1 Jun 2015
- US Navy (N9BG)
- Effective Date:
- 1 Jun 2015
- Supplementary Collaborators:
- GT
- US Navy (N9W5)
- Effective Date:
- 6 Sep 2005
- Supplementary Collaborators:
- GT
- Austria (WB01)
- Effective Date:
- 1 Feb 2005
- Slovenia (WL01)
- Effective Date:
- 1 Jan 2007
- Bulgaria (WU01)
- Effective Date:
- 1 Oct 2002
- Brazil (YA01)
- Effective Date:
- 1 Dec 1999
- Spain (YB01)
- Effective Date:
- 1 Feb 1994
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Nov 2001
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5365-00-126-4074
- Part Number
- Manufacturer
- Status
- 32721-1
- Manufacturer
- 59747 - Rexnord Industries, Llc (Active)
- Primary Buy
- Primary Buy
- 101584-2
- 8A623 - Ogs Industries, Inc (Active)
- Secondary Buy
- Secondary Buy
- 32721-1
- A0126 - Leonardo Spa Helicopters Division - (Active)
- Secondary Buy
- Secondary Buy
- 5365-OH58-001
- 81996 - Us Army Aviation And Missile Command (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5365-00-126-4074
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- End Item Identification [AGAV]
- Oh-58A,C Observation Helicopter
- Aperture Diameter [ABVL]
- 1.734 Inches Nominal
- Bolt Circle Diameter [ABKG]
- 2.344 Inches Nominal
- Bolt Hole Quantity [AECS]
- 4
- Construction [CQCF]
- Laminated
- Gasket Center To Flat Distance [ADVG]
- 1.461 Inches Nominal
- Gasket Center To Second Flat Distance [ADVH]
- 1.461 Inches Nominal
- Features Provided [CBBL]
- Nonseparable
- Hole Diameter [AAUB]
- 0.2495 Inches Minimum And 0.2505 Inches Maximum
- Material [MATT]
- Steel Corrosion Resisting
- Outside Diameter [ABKV]
- 2.984 Inches Nominal
- Lamination Quantity [BRDX]
- 10
- Special Features [FEAT]
- Four Equally Spaced 0.031 In. W Flats Opposite And Parallel To Each Other,Shim Assembled By Alternate Indexing Flats
Weapon Systems (WSDC) 5365-00-126-4074
DLA Procurement Analysis 5365-00-126-4074
- Last Stock Position:
- 435 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-00-126-4074
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Department of the Navy (DN)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Department of the Navy (DN)
- EA
- Subscribe
- 1
- EA
- Mar 2021
- Department of the Army (DA)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Army (DA)
- A
- V
- Discontinued Without Replacement
- V
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- BP
- Rotary Wing Aircraft
OH-58A and OH-58C
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- NV
- JOINT VERTICAL LIFT AIRCRAFT CV-22 (OSPREY)
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5365-00-126-4074
Freight Information 5365-00-126-4074
5365-00-126-4074 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5365-00-126-4074 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. 5365-00-126-4074 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5365-00-126-4074 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-00-126-4074 is not classified as a special type of cargo when transported by water. 5365-00-126-4074 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-00-126-4074
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- 4.0" H x 4.0" W x 1.2" L
- --
- --
- 0.25lb to 2lb, One dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 6.0" H x 6.0" W x 3.0" L
- --
- --
- --
- Any Suitable Process
- 6.0" H x 6.0" W x 3.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- ASTM-D5118, Type CF, Class Weather-Resistant, Single Wall, Corrugated Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- No Requirement
Procurement History 5365-00-126-4074 10 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A619F5334P00001
- 01 Dec 2018
- Subscribe
- 280
- Subscribe
- Subscribe
- Subscribe
- SPE4A619F2805
- 03 Nov 2018
- Subscribe
- 190
- Subscribe
- Subscribe
- Subscribe
- SPE4A619F0627
- 08 Oct 2018
- Subscribe
- 156
- Subscribe
- Subscribe
- Subscribe
- SPE4A618F711G
- 15 Sep 2018
- Subscribe
- 152
- Subscribe
- Subscribe
- Subscribe
- SPE4A618F585C
- 20 Aug 2018
- Subscribe
- 28
- Subscribe
- Subscribe
- Subscribe
- SPE4A618F462G
- 10 Jul 2018
- Subscribe
- 92
- Subscribe
- Subscribe
- Subscribe
- SPE4A618F009Q
- 04 Mar 2018
- Subscribe
- 232
- Subscribe
- Subscribe
- Subscribe
- SPE4A617D6680000101
- 30 Jun 2017
- Subscribe
- 734
- Subscribe
- Subscribe
- Subscribe
- SPE4A617PB008P00001
- 25 Apr 2017
- Subscribe
- 88
- Subscribe
- Subscribe
- Subscribe
- SPE4A617P8116P00002
- 24 Feb 2017
- Subscribe
- 3501
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5365-00-126-4074 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: