Premium Information is available for this item - Upgrade for $1 a day
5365-00-119-6160
Plate Spacer
5365001196160 001196160 53599
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. View more Plate Spacer
May 2023
18
Marketplace 5365-00-119-6160
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-119-6160 5+ Documents (More...)
5365/us 5365-00-119-6160 Plate Spacer 5365001196160 001196160,53599 53599 A flat metal or plastic item
5365001196160 001196160,53599 53599 A flat metal or plastic item https//www.nsnlookup.com /fsg-30/fsc
4-6 53599 A deformable material which prevents the passage of matter through the joint formed when two
Plate Spacer 5365001196160 001196160,53599 Quotation Subscribe to View Vendor Details... 53599
Details... 38306 SPIDER,DIFFERENTIAL 1 EA NS Request Quotation Subscribe to View Vendor Details... 53599
https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-00-119-6160 Plate Spacer 5365001196160 001196160,53599
Details... 12728 RECTIFIER,METALLIC 7 EA NS Request Quotation Subscribe to View Vendor Details... 53599
https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-00-119-6160 Plate Spacer 5365001196160 001196160,53599
Details... 12728 RECTIFIER,METALLIC 7 EA NS Request Quotation Subscribe to View Vendor Details... 53599
to View Vendor Details... 53599 RECTIFIER,METALLIC 15 EA NS Request Quotation Updated Every Day 6130
Restrictions 5365-00-119-6160
5365-00-119-6160 is a Plate Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-00-119-6160
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-00-119-6160
- US Air Force (FXGG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- FXCX
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- France (ZF01)
- Effective Date:
- 1 May 2015
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5365-00-119-6160
- Part Number
- Manufacturer
- Status
- 53599
- Manufacturer
- 73030 - Hamilton Sundstrand Corporation (Active)
- Primary Buy
- Primary Buy
Datasheet 5365-00-119-6160
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Aperture Length [ADUF]
- 3.890 Inches Minimum And 3.910 Inches Maximum
- Aperture Width [ADUE]
- 1.499 Inches Minimum And 1.519 Inches Maximum
- Bearing Surface Width [ADUV]
- 0.040 Inches Minimum And 0.060 Inches Maximum
- Hardness Rating [CQFM]
- 26.0 Rockwell C Minimum And 33.0 Rockwell C Maximum
- Material [MATT]
- Steel
- Material Document And Classification [MDCL]
- Hs 132,Grade 4,Fscm 73030 Mfr Ref Single Material Response
- Special Features [FEAT]
- Sharp Edges On Both Longitudinal Lengths And Concentric Concave Curvatures On 9.0781 In. Radius That Are 1.1878 In. Long Either Side Of Vertical Centerline And Single End Opening .250 In. Either Side Of 9.078 In. Horizontal Radius Centerline And Side Height Adjacent To Opening .312 In. Extending 1.187 In. Either Side Of Vertical Centerline
- Style Designator [STYL]
- Oval W/O Bolt Holes
- Surface Treatment Document And Classification [STDC]
- Hs 74,Fscm 73030 Mfr Ref Single Treatment Response
- Surface Treatment [SFTT]
- Chromate
DLA Procurement Analysis 5365-00-119-6160
Management Data 5365-00-119-6160
Similar Supply Items to 5365-00-119-6160
Freight Information 5365-00-119-6160
5365-00-119-6160 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 106940. A Sub NMFC of X. It has a NMFC Description of SPACERS/SEPARATORS I/S NOI TUBULAR. 5365-00-119-6160 is rated as class 55 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50675 which rates the freight between FCL and LCL. 5365-00-119-6160 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 574 for ocean manifesting and military sealift. 5365-00-119-6160 is not classified as a special type of cargo when transported by water. 5365-00-119-6160 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-00-119-6160
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- 100
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5365-00-119-6160 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: