Premium Information is available for this item - Upgrade for $1 a day
5365-00-110-6841
Shim
5365001106841 001106841 698353-1
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
November 2023
7
Marketplace 5365-00-110-6841
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-110-6841 2+ Documents (More...)
Updated Every Day 5365-00-110-6841 RQST NE Related Documents 5365-00-110-6841 2+ Documents ( More...
) https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-00-110-6841 Shim 5365001106841 001106841,698353-
Documents 5999-01-672-6024 5+ Documents ( More... https https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-00-110-6841
Shim 5365001106841 001106841,698353-1 00-110-6841 Shim 5365001106841 001106841,698353- https//www.nsnlookup.com
Restrictions 5365-00-110-6841
5365-00-110-6841 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5365-00-110-6841
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-00-110-6841
- US Air Force (FUGG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- FUCX
Approved Sources 5365-00-110-6841
- Part Number
- Manufacturer
- Status
- 698353-1
- Manufacturer
- 99193 - Honeywell International Inc. (Active)
- Primary Buy
- Primary Buy
- 698353-1
- 2N935 - Boeing Distribution Services X, Inc. (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5365-00-110-6841
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Aperture Diameter [ABVL]
- 1.820 Inches Minimum And 1.840 Inches Maximum
- Bolt Circle Diameter [ABKG]
- 2.160 Inches Nominal
- Bolt Hole Quantity [AECS]
- 3
- Construction [CQCF]
- One-Piece
- Hole Diameter [AAUB]
- 0.158 Inches Minimum And 0.167 Inches Maximum
- Material Document And Classification [MDCL]
- Mil-S-5059 Mil Spec Single Material Response
- Material [MATT]
- Steel Comp 301
- Outside Corner Radius [ADPW]
- 0.150 Inches Minimum And 0.170 Inches Maximum
- Side Radius From Gasket Center [ADVC]
- 1.010 Inches Minimum And 1.020 Inches Maximum
- Overall Width [ABMK]
- 2.310 Inches Minimum And 2.330 Inches Maximum
Weapon Systems (WSDC) 5365-00-110-6841
DLA Procurement Analysis 5365-00-110-6841
- Last Stock Position:
- 2255 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-00-110-6841
Similar Supply Items to 5365-00-110-6841
Freight Information 5365-00-110-6841
5365-00-110-6841 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5365-00-110-6841 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5365-00-110-6841 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-00-110-6841 is not classified as a special type of cargo when transported by water. 5365-00-110-6841 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-00-110-6841
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 5365-00-110-6841 1 Records
Contracting Technical Data File (CTDF) 5365-00-110-6841 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- H
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: