Premium Information is available for this item - Upgrade for $1 a day
5365-00-104-2124
Shim
5365001042124 001042124 375SB16P2 C123649 C125649
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
June 2023
13
Marketplace 5365-00-104-2124
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-104-2124 5+ Documents (More...)
1 21 5365-00-104-2124 2 23 5365-00-104-2124 3 23 5365-00-115-1475 1 20 3120-00-118-8535 -bearing-washer-thrust
/N E8CR131-0160 ............................... https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-00-104-2124
Shim 5365001042124 001042124,375SB16P2 5365-00-104-2124 5365001042124 001042124 is a thin flat
89619 375SB16P2 SHIM 0.005 THICK PART OF KIT P/N 5705073 ......................................
89616 375SB16P2 SHIM (0.005 THICK) PART OF KIT P/N 5705073 ....................................
89619 375SB16P2 SHIM 0.005 THICK PART OF KIT P/N E8CR131-0160 ................................
Restrictions 5365-00-104-2124
5365-00-104-2124 is a Shim Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5365-00-104-2124
- US Army (A919)
- Effective Date:
- 1 May 2005
- Supplementary Receivers:
- AZ
- US Marine Corps (MC41)
- Effective Date:
- 1 May 2005
- US Navy (N9BG)
- Effective Date:
- 1 May 2005
- Supplementary Collaborators:
- HD
- Brazil (YA)
- Brazil (YA01)
- Effective Date:
- 1 Mar 2001
- Spain (YB)
- Spain (YB01)
- Effective Date:
- 1 May 2007
- Republic of Korea (ZH)
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW)
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
- United States of America (ZZ)
Approved Sources 5365-00-104-2124
- Part Number
- Manufacturer
- Status
- 375SB16P2
- Manufacturer
- 89619 - Mack Trucks, Inc. (Active)
- Primary Buy
- Primary Buy
- C123649
- 4W602 - Borgwarner Turbo Systems Llc (Active)
- Secondary Buy
- Secondary Buy
- C125649
- 53591 - Schwitzer Engine Components (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Weapon Systems (WSDC) 5365-00-104-2124
DLA Procurement Analysis 5365-00-104-2124
Management Data 5365-00-104-2124
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
NATO Stock Numbers Related to 5365-00-104-2124
Freight Information 5365-00-104-2124
5365-00-104-2124 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5365-00-104-2124 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5365-00-104-2124 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-00-104-2124 is not classified as a special type of cargo when transported by water. 5365-00-104-2124 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5365-00-104-2124 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: