Premium Information is available for this item - Upgrade for $1 a day
5365-00-074-1785
Machine Thread Bushing
5365000741785 000741785 151445
A straight nonfluid fitting with wrenching facilities on one end and external threads, other than pipe or hose series, on the other end. It has an unthreaded through hole in its axis which may be countersunk and/or counterbored on one or both ends. It is designed to accommodate a shaft, or the like, or used to reinforce a hole in a bulkhead, or the like. For similar items specifically designed for use in a stuffing box, see PACKING NUT. For nonfluid items with an internal thread, see INSERT, SCREW THREAD; or ADAPTER BUSHING. Excludes REDUCER, BOSS; and items designed to accommodate a tube or tube fitting. View more Machine Thread Bushing
May 2023
6
Marketplace 5365-00-074-1785
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-074-1785 5+ Documents (More...)
Updated Every Day 5365-00-074-1785 RQST NE Updated Every Day 5365-00-074-1785 RQST Updated Every Day
5365-00-074-1785 RQST NE Related Documents 5365-00-074-1785 5+ Documents ( More... ) https//www.nsnlookup.com
https//www.nsnlookup.com /fsg-29/fsc-2910/us 2910-01-333-8272 Metering And Distributing Fuel Pump,151445
8272 Metering And Distributing Fuel Pump,151445 https//www.nsnlookup.com /fsg-61/fsc-6105/au 6105-66
151445 A device specifically designed to (1) increase the pressure of, (2) meter the amount of, (3)
https//www.nsnlookup.com /fsg-29/fsc-2910/us 2910-01-333-8272 Metering And Distributing Fuel Pump,151445
/www.nsnlookup.com /fsg-59/fsc-5940/us 5940-01-377-0406 Quick Disconnect Splice Set 5940013770406 151445
https//www.nsnlookup.com /fsg-29/fsc-2910/us 2910-01-333-8272 Metering And Distributing Fuel Pump,151445
/www.nsnlookup.com /fsg-59/fsc-5940/us 5940-01-370-3408 Quick Disconnect Splice Set 5940013703408 151445
https//www.nsnlookup.com /fsg-29/fsc-2910/us 2910-01-333-8272 Metering And Distributing Fuel Pump,151445
Restrictions 5365-00-074-1785
5365-00-074-1785 is a Machine Thread Bushing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5365-00-074-1785
- US Air Force (FUGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FUCX
Approved Sources 5365-00-074-1785
- Part Number
- Manufacturer
- Status
- 151445
- Manufacturer
- 55284 - Honeywell International Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 5365-00-074-1785
- Characteristic
- Specifications
- FIIG
- Specifications
- A540S0
- Counterbore Depth [AAWZ]
- 0.141 Inches Nominal
- Counterbore Diameter [AAWY]
- 1.628 Inches Nominal
- Counterbore Location [BDYS]
- Wrenching End
- Diameter [ABMZ]
- 0.190 Inches Nominal
- Features Provided [CBBL]
- Counterbore
- Hole Inside Diameter [BXBR]
- 1.376 Inches Nominal
- Nominal Thread Size [CQJX]
- 1.625 Inches
- Screw Thread Length [AJYR]
- 0.670 Inches Nominal
- Overall Length [ABHP]
- 1.500 Inches Nominal
- Wrenching Facility Shape [ACSL]
- Face Spanner
- Surface Treatment Document And Classification [STDC]
- Mil-C-5541 Mil Spec Single Treatment Response
- Surface Treatment [SFTT]
- Chromate
- Thickness [ABNM]
- 0.315 Inches Nominal
- Thread Direction [AAJF]
- Right-Hand
- Thread Series Designator [THSD]
- Un
- Thread Quantity Per Inch [CMLP]
- 12
Weapon Systems (WSDC) 5365-00-074-1785
DLA Procurement Analysis 5365-00-074-1785
Management Data 5365-00-074-1785
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- LE
- LANDING GEAR SYSTEMS AND COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5365-00-074-1785
Freight Information 5365-00-074-1785
5365-00-074-1785 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 115620. A Sub NMFC of X. It has a NMFC Description of BUSHINGS NOI I/S. 5365-00-074-1785 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 59240 which rates the freight between FCL and LCL. 5365-00-074-1785 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 5365-00-074-1785 is not classified as a special type of cargo when transported by water. 5365-00-074-1785 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5365-00-074-1785 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: