Premium Information is available for this item - Upgrade for $1 a day
5365-00-059-9198
Shim
5365000599198 000599198 A5504
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
May 2023
4
Marketplace 5365-00-059-9198
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-059-9198 2+ Documents (More...)
Updated Every Day 5365-00-059-9198 RQST NE Updated Every Day 5365-00-059-9198 RQST Updated Every Day
/fsg-53/fsc-5365/us 5365-00-059-9198 Shim 5365000599198000599198,A5504 A5504 SHIM 7 EA NS Request Quotation
Restrictions 5365-00-059-9198
5365-00-059-9198 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5365-00-059-9198
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-00-059-9198
- US Air Force (FXGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FXCX
Approved Sources 5365-00-059-9198
- Part Number
- Manufacturer
- Status
- A5504
- Manufacturer
- 98889 - Aerocontrolex Group, Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 5365-00-059-9198
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Aperture Diameter [ABVL]
- 1.376 Inches Nominal
- Bolt Hole Quantity [AECS]
- 4
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 1.156 Inches Nominal
- Center To Center Distance Between Bolt Holes Along Width [ADUY]
- 1.156 Inches Nominal
- Construction [CQCF]
- One-Piece
- Hole Diameter [AAUB]
- 0.196 Inches Nominal
- Material [MATT]
- Steel
- Outside Corner Bevel Length Along Length [ADUQ]
- 0.141 Inches Nominal
- Outside Corner Bevel Length Along Width [ADUP]
- 0.141 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.141 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Width [ADVD]
- 0.141 Inches Nominal
- Fsc Application Data [ZZZV]
- Actuator,Electro-Mechanical,Linear,Airframe Component
- Overall Length [ABHP]
- 1.437 Inches Nominal
- Overall Width [ABMK]
- 1.437 Inches Nominal
- Special Features [FEAT]
- One
DLA Procurement Analysis 5365-00-059-9198
Management Data 5365-00-059-9198
Similar Supply Items to 5365-00-059-9198
Freight Information 5365-00-059-9198
5365-00-059-9198 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of H. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI SUB8. 5365-00-059-9198 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. 5365-00-059-9198 is rated as class 100 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 596 for ocean manifesting and military sealift. 5365-00-059-9198 is not classified as a special type of cargo when transported by water. 5365-00-059-9198 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5365-00-059-9198 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: