5365-99-715-0088

617-6046 Part NumberManufacturerStatusMBEU/22505 https//www.nsnlookup.com /fsg-53/fsc-5365/uk 5365-99-715-0088
Shim Set 5365997150088 997150088,AMBEU22505 5365-99-715-0088 5365997150088 997150088 SHIM SET https

abutting pieces to position and hold them in place. https//www.nsnlookup.com /fsg-53/fsc-5365/uk 5365-99-715-0088
Shim Set 5365997150088 997150088,AMBEU22505 5365-99-715-0088 5365997150088 997150088 SHIM SET Restrictions

metal or plastic item of various peripheral shapes https//www.nsnlookup.com /fsg-53/fsc-5365/uk 5365-99-715-0088
Shim Set 5365997150088 997150088,AMBEU22505 5365-99-715-0088 5365997150088 997150088 SHIM SET Restrictions

6520-99-002-3119 6520990023119 990023119 BALL ABUTMENT REPLI

5365-99-617-6046 5365996176046 996176046 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.